For more information on a specific command, type HELP command-name

ASSOC          Displays or modifies file extension associations.

ATTRIB         Displays or changes file attributes.

BREAK          Sets or clears extended CTRL+C checking.

BCDEDIT        Sets properties in boot database to control boot loading.

CACLS          Displays or modifies access control lists (ACLs) of files.

CALL           Calls one batch program from another.

CD             Displays the name of or changes the current directory.

CHCP           Displays or sets the active code page number.

CHDIR          Displays the name of or changes the current directory.

CHKDSK         Checks a disk and displays a status report.

CHKNTFS        Displays or modifies the checking of disk at boot time.

CLS            Clears the screen.

CMD            Starts a new instance of the Windows command interpreter.

COLOR          Sets the default console foreground and background colors.

COMP           Compares the contents of two files or sets of files.

COMPACT        Displays or alters the compression of files on NTFS partitions.

CONVERT        Converts FAT volumes to NTFS.  You cannot convert the

               current drive.

COPY           Copies one or more files to another location.

DATE           Displays or sets the date.

DEL            Deletes one or more files.

DIR            Displays a list of files and subdirectories in a directory.

DISKPART       Displays or configures Disk Partition properties.

DOSKEY         Edits command lines, recalls Windows commands, and

               creates macros.

DRIVERQUERY    Displays current device driver status and properties.

ECHO           Displays messages, or turns command echoing on or off.

ENDLOCAL       Ends localization of environment changes in a batch file.

ERASE          Deletes one or more files.

EXIT           Quits the CMD.EXE program (command interpreter).

FC             Compares two files or sets of files, and displays the

               differences between them.

FIND           Searches for a text string in a file or files.

FINDSTR        Searches for strings in files.

FOR            Runs a specified command for each file in a set of files.

FORMAT         Formats a disk for use with Windows.

FSUTIL         Displays or configures the file system properties.

FTYPE          Displays or modifies file types used in file extension

               associations.

GOTO           Directs the Windows command interpreter to a labeled line in

               a batch program.

GPRESULT       Displays Group Policy information for machine or user.

HELP           Provides Help information for Windows commands.

ICACLS         Display, modify, backup, or restore ACLs for files and

               directories.

IF             Performs conditional processing in batch programs.

LABEL          Creates, changes, or deletes the volume label of a disk.

MD             Creates a directory.

MKDIR          Creates a directory.

MKLINK         Creates Symbolic Links and Hard Links

MODE           Configures a system device.

MORE           Displays output one screen at a time.

MOVE           Moves one or more files from one directory to another

               directory.

OPENFILES      Displays files opened by remote users for a file share.

PATH           Displays or sets a search path for executable files.

PAUSE          Suspends processing of a batch file and displays a message.

POPD           Restores the previous value of the current directory saved by

               PUSHD.

PRINT          Prints a text file.

PROMPT         Changes the Windows command prompt.

PUSHD          Saves the current directory then changes it.

RD             Removes a directory.

RECOVER        Recovers readable information from a bad or defective disk.

REM            Records comments (remarks) in batch files or CONFIG.SYS.

REN            Renames a file or files.

RENAME         Renames a file or files.

REPLACE        Replaces files.

RMDIR          Removes a directory.

ROBOCOPY       Advanced utility to copy files and directory trees

SET            Displays, sets, or removes Windows environment variables.

SETLOCAL       Begins localization of environment changes in a batch file.

SC             Displays or configures services (background processes).

SCHTASKS       Schedules commands and programs to run on a computer.

SHIFT          Shifts the position of replaceable parameters in batch files.

SHUTDOWN       Allows proper local or remote shutdown of machine.

SORT           Sorts input.

START          Starts a separate window to run a specified program or command.

SUBST          Associates a path with a drive letter.

SYSTEMINFO     Displays machine specific properties and configuration.

TASKLIST       Displays all currently running tasks including services.

TASKKILL       Kill or stop a running process or application.

TIME           Displays or sets the system time.

TITLE          Sets the window title for a CMD.EXE session.

TREE           Graphically displays the directory structure of a drive or

               path.

TYPE           Displays the contents of a text file.

VER            Displays the Windows version.

VERIFY         Tells Windows whether to verify that your files are written

               correctly to a disk.

VOL            Displays a disk volume label and serial number.

XCOPY          Copies files and directory trees.

WMIC           Displays WMI information inside interactive command shell.

 

For more information on tools see the command-line reference in the online help.

 

ASSOC

 

Displays or modifies file extension associations

 

ASSOC [.ext[=[fileType]]]

 

  .ext      Specifies the file extension to associate the file type with

  fileType  Specifies the file type to associate with the file extension

 

Type ASSOC without parameters to display the current file associations.

If ASSOC is invoked with just a file extension, it displays the current

file association for that file extension.  Specify nothing for the file

type and the command will delete the association for the file extension.

ATTRIB

 

Displays or changes file attributes.

 

ATTRIB [+R | -R] [+A | -A] [+S | -S] [+H | -H] [+O | -O] [+I | -I] [+X | -X] [+P | -P] [+U | -U]

       [drive:][path][filename] [/S [/D]] [/L]

 

  +   Sets an attribute.

  -   Clears an attribute.

  R   Read-only file attribute.

  A   Archive file attribute.

  S   System file attribute.

  H   Hidden file attribute.

  O   Offline attribute.

  I   Not content indexed file attribute.

  X   No scrub file attribute.

  V   Integrity attribute.

  P   Pinned attribute.

  U   Unpinned attribute.

  B   SMR Blob attribute.

  [drive:][path][filename]

      Specifies a file or files for attrib to process.

  /S  Processes matching files in the current folder

      and all subfolders.

  /D  Processes folders as well.

  /L  Work on the attributes of the Symbolic Link versus

      the target of the Symbolic Link

 

BCDEDIT

 

 

BCDEDIT - Boot Configuration Data Store Editor

 

The Bcdedit.exe command-line tool modifies the boot configuration data store.

The boot configuration data store contains boot configuration parameters and

controls how the operating system is booted. These parameters were previously

in the Boot.ini file (in BIOS-based operating systems) or in the nonvolatile

RAM entries (in Extensible Firmware Interface-based operating systems). You can

use Bcdedit.exe to add, delete, edit, and append entries in the boot

configuration data store.

 

For detailed command and option information, type bcdedit.exe /? <command>. For

example, to display detailed information about the /createstore command, type:

 

     bcdedit.exe /? /createstore

 

For an alphabetical list of topics in this help file, run "bcdedit /? TOPICS".

 

Commands that operate on a store

================================

/store          Used to specify a BCD store other than the current system default.

/createstore    Creates a new and empty boot configuration data store.

/export         Exports the contents of the system store to a file. This file

                can be used later to restore the state of the system store.

/import         Restores the state of the system store using a backup file

                created with the /export command.

/sysstore       Sets the system store device (only affects EFI systems, does

                not persist across reboots, and is only used in cases where

                the system store device is ambiguous).

 

Commands that operate on entries in a store

===========================================

/copy           Makes copies of entries in the store.

/create         Creates new entries in the store.

/delete         Deletes entries from the store.

/mirror         Creates mirror of entries in the store.

 

Run bcdedit /? ID for information about identifiers used by these commands.

 

Commands that operate on entry options

======================================

/deletevalue    Deletes entry options from the store.

/set            Sets entry option values in the store.

 

Run bcdedit /? TYPES for a list of datatypes used by these commands.

Run bcdedit /? FORMATS for a list of valid data formats.

 

Commands that control output

============================

/enum           Lists entries in the store.

/v              Command-line option that displays entry identifiers in full,

                rather than using names for well-known identifiers.

                Use /v by itself as a command to display entry identifiers

                in full for the ACTIVE type.

 

Running "bcdedit" by itself is equivalent to running "bcdedit /enum ACTIVE".

 

Commands that control the boot manager

======================================

/bootsequence   Sets the one-time boot sequence for the boot manager.

/default        Sets the default entry that the boot manager will use.

/displayorder   Sets the order in which the boot manager displays the

                multiboot menu.

/timeout        Sets the boot manager time-out value.

/toolsdisplayorder  Sets the order in which the boot manager displays

                    the tools menu.

 

Commands that control Emergency Management Services for a boot application

==========================================================================

/bootems        Enables or disables Emergency Management Services

                for a boot application.

/ems            Enables or disables Emergency Management Services for an

                operating system entry.

/emssettings    Sets the global Emergency Management Services parameters.

 

Command that control debugging

==============================

/bootdebug      Enables or disables boot debugging for a boot application.

/dbgsettings    Sets the global debugger parameters.

/debug          Enables or disables kernel debugging for an operating system

                entry.

/hypervisorsettings  Sets the hypervisor parameters.

 

Command that control remote event logging

=========================================

/eventsettings  Sets the global remote event logging parameters.

/event          Enables or disables remote event logging for an operating

                system entry.

 

BREAK

 

Sets or Clears Extended CTRL+C checking on DOS system

 

This is present for Compatibility with DOS systems. It has no effect

under Windows.

 

If Command Extensions are enabled, and running on the Windows

platform, then the BREAK command will enter a hard coded breakpoint

if being debugged by a debugger.

CACLS

 

 

 

 NOTE: Cacls is now deprecated, please use Icacls.

 

 

 

 Displays or modifies access control lists (ACLs) of files

 

 

 

 CACLS filename [/T] [/M] [/L] [/S[:SDDL]] [/E] [/C] [/G user:perm]

 

        [/R user [...]] [/P user:perm [...]] [/D user [...]]

 

    filename      Displays ACLs.

 

    /T            Changes ACLs of specified files in

 

                  the current directory and all subdirectories.

 

    /L            Work on the Symbolic Link itself versus the target

 

    /M            Changes ACLs of volumes mounted to a directory

 

    /S            Displays the SDDL string for the DACL.

 

    /S:SDDL       Replaces the ACLs with those specified in the SDDL string

 

                  (not valid with /E, /G, /R, /P, or /D).

 

    /E            Edit ACL instead of replacing it.

 

    /C            Continue on access denied errors.

 

    /G user:perm  Grant specified user access rights.

 

                  Perm can be: R  Read

 

                               W  Write

 

                               C  Change (write)

 

                               F  Full control

 

    /R user       Revoke specified user's access rights (only valid with /E).

 

    /P user:perm  Replace specified user's access rights.

 

                  Perm can be: N  None

 

                               R  Read

 

                               W  Write

 

                               C  Change (write)

 

                               F  Full control

 

    /D user       Deny specified user access.

 

 Wildcards can be used to specify more than one file in a command.

 

 You can specify more than one user in a command.

 

 

 

 Abbreviations:

 

    CI - Container Inherit.

 

         The ACE will be inherited by directories.

 

    OI - Object Inherit.

 

         The ACE will be inherited by files.

 

    IO - Inherit Only.

 

         The ACE does not apply to the current file/directory.

 

    ID - Inherited.

 

         The ACE was inherited from the parent directory's ACL.

 

CALL

 

Calls one batch program from another.

 

CALL [drive:][path]filename [batch-parameters]

 

  batch-parameters   Specifies any command-line information required by the

                     batch program.

 

If Command Extensions are enabled CALL changes as follows:

 

CALL command now accepts labels as the target of the CALL.  The syntax

is:

 

    CALL :label arguments

 

A new batch file context is created with the specified arguments and

control is passed to the statement after the label specified.  You must

"exit" twice by reaching the end of the batch script file twice.  The

first time you read the end, control will return to just after the CALL

statement.  The second time will exit the batch script.  Type GOTO /?

for a description of the GOTO :EOF extension that will allow you to

"return" from a batch script.

 

In addition, expansion of batch script argument references (%0, %1,

etc.) have been changed as follows:

 

 

    %* in a batch script refers to all the arguments (e.g. %1 %2 %3

        %4 %5 ...)

 

    Substitution of batch parameters (%n) has been enhanced.  You can

    now use the following optional syntax:

 

        %~1         - expands %1 removing any surrounding quotes (")

        %~f1        - expands %1 to a fully qualified path name

        %~d1        - expands %1 to a drive letter only

        %~p1        - expands %1 to a path only

        %~n1        - expands %1 to a file name only

        %~x1        - expands %1 to a file extension only

        %~s1        - expanded path contains short names only

        %~a1        - expands %1 to file attributes

        %~t1        - expands %1 to date/time of file

        %~z1        - expands %1 to size of file

        %~$PATH:1   - searches the directories listed in the PATH

                       environment variable and expands %1 to the fully

                       qualified name of the first one found.  If the

                       environment variable name is not defined or the

                       file is not found by the search, then this

                       modifier expands to the empty string

 

    The modifiers can be combined to get compound results:

 

        %~dp1       - expands %1 to a drive letter and path only

        %~nx1       - expands %1 to a file name and extension only

        %~dp$PATH:1 - searches the directories listed in the PATH

                       environment variable for %1 and expands to the

                       drive letter and path of the first one found.

        %~ftza1     - expands %1 to a DIR like output line

 

    In the above examples %1 and PATH can be replaced by other

    valid values.  The %~ syntax is terminated by a valid argument

    number.  The %~ modifiers may not be used with %*

CD

 

Displays the name of or changes the current directory.

 

CHDIR [/D] [drive:][path]

CHDIR [..]

CD [/D] [drive:][path]

CD [..]

 

  ..   Specifies that you want to change to the parent directory.

 

Type CD drive: to display the current directory in the specified drive.

Type CD without parameters to display the current drive and directory.

 

Use the /D switch to change current drive in addition to changing current

directory for a drive.

 

If Command Extensions are enabled CHDIR changes as follows:

 

The current directory string is converted to use the same case as

the on disk names.  So CD C:\TEMP would actually set the current

directory to C:\Temp if that is the case on disk.

 

CHDIR command does not treat spaces as delimiters, so it is possible to

CD into a subdirectory name that contains a space without surrounding

the name with quotes.  For example:

 

    cd \winnt\profiles\username\programs\start menu

 

is the same as:

 

    cd "\winnt\profiles\username\programs\start menu"

 

which is what you would have to type if extensions were disabled.

CHCP

 

Displays or sets the active code page number.

 

CHCP [nnn]

 

  nnn   Specifies a code page number.

 

Type CHCP without a parameter to display the active code page number.

CHDIR

 

Displays the name of or changes the current directory.

 

CHDIR [/D] [drive:][path]

CHDIR [..]

CD [/D] [drive:][path]

CD [..]

 

  ..   Specifies that you want to change to the parent directory.

 

Type CD drive: to display the current directory in the specified drive.

Type CD without parameters to display the current drive and directory.

 

Use the /D switch to change current drive in addition to changing current

directory for a drive.

 

If Command Extensions are enabled CHDIR changes as follows:

 

The current directory string is converted to use the same case as

the on disk names.  So CD C:\TEMP would actually set the current

directory to C:\Temp if that is the case on disk.

 

CHDIR command does not treat spaces as delimiters, so it is possible to

CD into a subdirectory name that contains a space without surrounding

the name with quotes.  For example:

 

    cd \winnt\profiles\username\programs\start menu

 

is the same as:

 

    cd "\winnt\profiles\username\programs\start menu"

 

which is what you would have to type if extensions were disabled.

CHKDSK

 

Checks a disk and displays a status report.

 

 

CHKDSK [volume[[path]filename]]] [/F] [/V] [/R] [/X] [/I] [/C] [/L[:size]] [/B] [/scan] [/spotfix]

 

 

  volume              Specifies the drive letter (followed by a colon),

                      mount point, or volume name.

  filename            FAT/FAT32 only: Specifies the files to check for

                      fragmentation.

  /F                  Fixes errors on the disk.

  /V                  On FAT/FAT32: Displays the full path and name of every

                      file on the disk.

                      On NTFS: Displays cleanup messages if any.

  /R                  Locates bad sectors and recovers readable information

                      (implies /F, when /scan not specified).

  /L:size             NTFS only:  Changes the log file size to the specified

                      number of kilobytes.  If size is not specified, displays

                      current size.

  /X                  Forces the volume to dismount first if necessary.

                      All opened handles to the volume would then be invalid

                      (implies /F).

  /I                  NTFS only: Performs a less vigorous check of index

                      entries.

  /C                  NTFS only: Skips checking of cycles within the folder

                      structure.

  /B                  NTFS only: Re-evaluates bad clusters on the volume

                      (implies /R)

  /scan               NTFS only: Runs an online scan on the volume

  /forceofflinefix    NTFS only: (Must be used with "/scan")

                      Bypass all online repair; all defects found

                      are queued for offline repair (i.e. "chkdsk /spotfix").

  /perf               NTFS only: (Must be used with "/scan")

                      Uses more system resources to complete a scan as fast as

                      possible. This may have a negative performance impact on

                      other tasks running on the system.

  /spotfix            NTFS only: Runs spot fixing on the volume

  /sdcleanup          NTFS only: Garbage collect unneeded security descriptor

                      data (implies /F).

  /offlinescanandfix  Runs an offline scan and fix on the volume.

  /freeorphanedchains FAT/FAT32/exFAT only: Frees any orphaned cluster chains

                      instead of recovering their contents.

  /markclean          FAT/FAT32/exFAT only: Marks the volume clean if no

                      corruption was detected, even if /F was not specified.

 

The /I or /C switch reduces the amount of time required to run Chkdsk by

skipping certain checks of the volume.

CHKNTFS

 

Displays or modifies the checking of disk at boot time.

 

CHKNTFS volume [...]

CHKNTFS /D

CHKNTFS /T[:time]

CHKNTFS /X volume [...]

CHKNTFS /C volume [...]

 

  volume         Specifies the drive letter (followed by a colon),

                 mount point, or volume name.

  /D             Restores the machine to the default behavior; all drives are

                 checked at boot time and chkdsk is run on those that are

                 dirty.

  /T:time        Changes the AUTOCHK initiation countdown time to the

                 specified amount of time in seconds.  If time is not

                 specified, displays the current setting.

  /X             Excludes a drive from the default boot-time check.  Excluded

                 drives are not accumulated between command invocations.

  /C             Schedules a drive to be checked at boot time; chkdsk will run

                 if the drive is dirty.

 

If no switches are specified, CHKNTFS will display if the specified drive is

dirty or scheduled to be checked on next reboot.

CLS

 

Clears the screen.

 

CLS

CMD

 

Starts a new instance of the Windows command interpreter

 

CMD [/A | /U] [/Q] [/D] [/E:ON | /E:OFF] [/F:ON | /F:OFF] [/V:ON | /V:OFF]

    [[/S] [/C | /K] string]

 

/C      Carries out the command specified by string and then terminates

/K      Carries out the command specified by string but remains

/S      Modifies the treatment of string after /C or /K (see below)

/Q      Turns echo off

/D      Disable execution of AutoRun commands from registry (see below)

/A      Causes the output of internal commands to a pipe or file to be ANSI

/U      Causes the output of internal commands to a pipe or file to be

        Unicode

/T:fg   Sets the foreground/background colors (see COLOR /? for more info)

/E:ON   Enable command extensions (see below)

/E:OFF  Disable command extensions (see below)

/F:ON   Enable file and directory name completion characters (see below)

/F:OFF  Disable file and directory name completion characters (see below)

/V:ON   Enable delayed environment variable expansion using ! as the

        delimiter. For example, /V:ON would allow !var! to expand the

        variable var at execution time.  The var syntax expands variables

        at input time, which is quite a different thing when inside of a FOR

        loop.

/V:OFF  Disable delayed environment expansion.

 

Note that multiple commands separated by the command separator '&&'

are accepted for string if surrounded by quotes.  Also, for compatibility

reasons, /X is the same as /E:ON, /Y is the same as /E:OFF and /R is the

same as /C.  Any other switches are ignored.

 

If /C or /K is specified, then the remainder of the command line after

the switch is processed as a command line, where the following logic is

used to process quote (") characters:

 

    1.  If all of the following conditions are met, then quote characters

        on the command line are preserved:

 

        - no /S switch

        - exactly two quote characters

        - no special characters between the two quote characters,

          where special is one of: &<>()@^|

        - there are one or more whitespace characters between the

          two quote characters

        - the string between the two quote characters is the name

          of an executable file.

 

    2.  Otherwise, old behavior is to see if the first character is

        a quote character and if so, strip the leading character and

        remove the last quote character on the command line, preserving

        any text after the last quote character.

 

If /D was NOT specified on the command line, then when CMD.EXE starts, it

looks for the following REG_SZ/REG_EXPAND_SZ registry variables, and if

either or both are present, they are executed first.

 

    HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\AutoRun

 

        and/or

 

    HKEY_CURRENT_USER\Software\Microsoft\Command Processor\AutoRun

 

Command Extensions are enabled by default.  You may also disable

extensions for a particular invocation by using the /E:OFF switch.  You

can enable or disable extensions for all invocations of CMD.EXE on a

machine and/or user logon session by setting either or both of the

following REG_DWORD values in the registry using REGEDIT.EXE:

 

    HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\EnableExtensions

 

        and/or

 

    HKEY_CURRENT_USER\Software\Microsoft\Command Processor\EnableExtensions

 

to either 0x1 or 0x0.  The user specific setting takes precedence over

the machine setting.  The command line switches take precedence over the

registry settings.

 

In a batch file, the SETLOCAL ENABLEEXTENSIONS or DISABLEEXTENSIONS arguments

takes precedence over the /E:ON or /E:OFF switch. See SETLOCAL /? for details.

 

The command extensions involve changes and/or additions to the following

commands:

 

    DEL or ERASE

    COLOR

    CD or CHDIR

    MD or MKDIR

    PROMPT

    PUSHD

    POPD

    SET

    SETLOCAL

    ENDLOCAL

    IF

    FOR

    CALL

    SHIFT

    GOTO

    START (also includes changes to external command invocation)

    ASSOC

    FTYPE

 

To get specific details, type commandname /? to view the specifics.

 

Delayed environment variable expansion is NOT enabled by default.  You

can enable or disable delayed environment variable expansion for a

particular invocation of CMD.EXE with the /V:ON or /V:OFF switch.  You

can enable or disable delayed expansion for all invocations of CMD.EXE on a

machine and/or user logon session by setting either or both of the

following REG_DWORD values in the registry using REGEDIT.EXE:

 

    HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\DelayedExpansion

 

        and/or

 

    HKEY_CURRENT_USER\Software\Microsoft\Command Processor\DelayedExpansion

 

to either 0x1 or 0x0.  The user specific setting takes precedence over

the machine setting.  The command line switches take precedence over the

registry settings.

 

In a batch file the SETLOCAL ENABLEDELAYEDEXPANSION or DISABLEDELAYEDEXPANSION

arguments takes precedence over the /V:ON or /V:OFF switch. See SETLOCAL /?

for details.

 

If delayed environment variable expansion is enabled, then the exclamation

character can be used to substitute the value of an environment variable

at execution time.

 

You can enable or disable file name completion for a particular

invocation of CMD.EXE with the /F:ON or /F:OFF switch.  You can enable

or disable completion for all invocations of CMD.EXE on a machine and/or

user logon session by setting either or both of the following REG_DWORD

values in the registry using REGEDIT.EXE:

 

    HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\CompletionChar

    HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\PathCompletionChar

 

        and/or

 

    HKEY_CURRENT_USER\Software\Microsoft\Command Processor\CompletionChar

    HKEY_CURRENT_USER\Software\Microsoft\Command Processor\PathCompletionChar

 

with the hex value of a control character to use for a particular

function (e.g.  0x4 is Ctrl-D and 0x6 is Ctrl-F).  The user specific

settings take precedence over the machine settings.  The command line

switches take precedence over the registry settings.

 

If completion is enabled with the /F:ON switch, the two control

characters used are Ctrl-D for directory name completion and Ctrl-F for

file name completion.  To disable a particular completion character in

the registry, use the value for space (0x20) as it is not a valid

control character.

 

Completion is invoked when you type either of the two control

characters.  The completion function takes the path string to the left

of the cursor appends a wild card character to it if none is already

present and builds up a list of paths that match.  It then displays the

first matching path.  If no paths match, it just beeps and leaves the

display alone.  Thereafter, repeated pressing of the same control

character will cycle through the list of matching paths.  Pressing the

Shift key with the control character will move through the list

backwards.  If you edit the line in any way and press the control

character again, the saved list of matching paths is discarded and a new

one generated.  The same occurs if you switch between file and directory

name completion.  The only difference between the two control characters

is the file completion character matches both file and directory names,

while the directory completion character only matches directory names.

If file completion is used on any of the built in directory commands

(CD, MD or RD) then directory completion is assumed.

 

The completion code deals correctly with file names that contain spaces

or other special characters by placing quotes around the matching path.

Also, if you back up, then invoke completion from within a line, the

text to the right of the cursor at the point completion was invoked is

discarded.

 

The special characters that require quotes are:

     <space>

     &()[]{}^=;!'+,`~

COLOR

 

Sets the default console foreground and background colors.

 

COLOR [attr]

 

  attr        Specifies color attribute of console output

 

Color attributes are specified by TWO hex digits -- the first

corresponds to the background; the second the foreground.  Each digit

can be any of the following values:

 

    0 = Black       8 = Gray

    1 = Blue        9 = Light Blue

    2 = Green       A = Light Green

    3 = Aqua        B = Light Aqua

    4 = Red         C = Light Red

    5 = Purple      D = Light Purple

    6 = Yellow      E = Light Yellow

    7 = White       F = Bright White

 

If no argument is given, this command restores the color to what it was

when CMD.EXE started.  This value either comes from the current console

window, the /T command line switch or from the DefaultColor registry

value.

 

The COLOR command sets ERRORLEVEL to 1 if an attempt is made to execute

the COLOR command with a foreground and background color that are the

same.

 

Example: "COLOR fc" produces light red on bright white

COMP

 

Compares the contents of two files or sets of files.

 

COMP [data1] [data2] [/D] [/A] [/L] [/N=number] [/C] [/OFF[LINE]] [/M]

 

  data1      Specifies location and name(s) of first file(s) to compare.

  data2      Specifies location and name(s) of second files to compare.

  /D         Displays differences in decimal format.

  /A         Displays differences in ASCII characters.

  /L         Displays line numbers for differences.

  /N=number  Compares only the first specified number of lines in each file.

  /C         Disregards case of ASCII letters when comparing files.

  /OFF[LINE] Do not skip files with offline attribute set.

  /M         Do not prompt for compare more files.

 

To compare sets of files, use wildcards in data1 and data2 parameters.

COMPACT

 

Displays or alters the compression of files on NTFS partitions.

 

COMPACT [/C | /U] [/S[:dir]] [/A] [/I] [/F] [/Q] [/EXE[:algorithm]]

        [/CompactOs[:option] [/WinDir:dir]] [filename [...]]

 

  /C         Compresses the specified files.  Directories will be marked

             so that files added afterward will be compressed unless /EXE

             is specified.

  /U         Uncompresses the specified files.  Directories will be marked

             so that files added afterward will not be compressed.  If

             /EXE is specified, only files compressed as executables will

             be uncompressed; if this is omitted, only NTFS compressed

             files will be uncompressed.

  /S         Performs the specified operation on files in the given

             directory and all subdirectories.  Default "dir" is the

             current directory.

  /A         Displays files with the hidden or system attributes.  These

             files are omitted by default.

  /I         Continues performing the specified operation even after errors

             have occurred.  By default, COMPACT stops when an error is

             encountered.

  /F         Forces the compress operation on all specified files, even

             those which are already compressed.  Already-compressed files

             are skipped by default.

  /Q         Reports only the most essential information.

  /EXE       Use compression optimized for executable files which are read

             frequently and not modified.  Supported algorithms are:

             XPRESS4K  (fastest) (default)

             XPRESS8K

             XPRESS16K

             LZX       (most compact)

  /CompactOs Set or query the system's compression state.  Supported options are:

             query  - Query the system's Compact state.

             always - Compress all OS binaries and set the system state to Compact

                      which remains unless administrator changes it.

             never  - Uncompress all OS binaries and set the system state to non

                      Compact which remains unless administrator changes it.

  /WinDir    Used with /CompactOs:query, when querying the offline OS. Specifies

             the directory where Windows is installed.

  filename   Specifies a pattern, file, or directory.

 

  Used without parameters, COMPACT displays the compression state of

  the current directory and any files it contains. You may use multiple

  filenames and wildcards.  You must put spaces between multiple

  parameters.

CONVERT

 

Converts a FAT volume to NTFS.

 

CONVERT volume /FS:NTFS [/V] [/CvtArea:filename] [/NoSecurity] [/X]

 

 

  volume      Specifies the drive letter (followed by a colon),

              mount point, or volume name.

  /FS:NTFS    Specifies that the volume will be converted to NTFS.

  /V          Specifies that Convert will be run in verbose mode.

  /CvtArea:filename

              Specifies a contiguous file in the root directory

              that will be the place holder for NTFS system files.

  /NoSecurity Specifies that the security settings on the converted

              files and directories allow access by all users.

  /X          Forces the volume to dismount first if necessary.

              All open handles to the volume will not be valid.

COPY

 

Copies one or more files to another location.

 

COPY [/D] [/V] [/N] [/Y | /-Y] [/Z] [/L] [/A | /B ] source [/A | /B]

     [+ source [/A | /B] [+ ...]] [destination [/A | /B]]

 

  source       Specifies the file or files to be copied.

  /A           Indicates an ASCII text file.

  /B           Indicates a binary file.

  /D           Allow the destination file to be created decrypted

  destination  Specifies the directory and/or filename for the new file(s).

  /V           Verifies that new files are written correctly.

  /N           Uses short filename, if available, when copying a file with a

               non-8dot3 name.

  /Y           Suppresses prompting to confirm you want to overwrite an

               existing destination file.

  /-Y          Causes prompting to confirm you want to overwrite an

               existing destination file.

  /Z           Copies networked files in restartable mode.

  /L           If the source is a symbolic link, copy the link to the target

               instead of the actual file the source link points to.

 

The switch /Y may be preset in the COPYCMD environment variable.

This may be overridden with /-Y on the command line.  Default is

to prompt on overwrites unless COPY command is being executed from

within a batch script.

 

To append files, specify a single file for destination, but multiple files

for source (using wildcards or file1+file2+file3 format).

DATE

 

Displays or sets the date.

 

DATE [/T | date]

 

Type DATE without parameters to display the current date setting and

a prompt for a new one.  Press ENTER to keep the same date.

 

If Command Extensions are enabled the DATE command supports

the /T switch which tells the command to just output the

current date, without prompting for a new date.

DEL

 

Deletes one or more files.

 

DEL [/P] [/F] [/S] [/Q] [/A[[:]attributes]] names

ERASE [/P] [/F] [/S] [/Q] [/A[[:]attributes]] names

 

  names         Specifies a list of one or more files or directories.

                Wildcards may be used to delete multiple files. If a

                directory is specified, all files within the directory

                will be deleted.

 

  /P            Prompts for confirmation before deleting each file.

  /F            Force deleting of read-only files.

  /S            Delete specified files from all subdirectories.

  /Q            Quiet mode, do not ask if ok to delete on global wildcard

  /A            Selects files to delete based on attributes

  attributes    R  Read-only files            S  System files

                H  Hidden files               A  Files ready for archiving

                I  Not content indexed Files  L  Reparse Points

                O  Offline files              -  Prefix meaning not

 

If Command Extensions are enabled DEL and ERASE change as follows:

 

The display semantics of the /S switch are reversed in that it shows

you only the files that are deleted, not the ones it could not find.

DIR

 

Displays a list of files and subdirectories in a directory.

 

DIR [drive:][path][filename] [/A[[:]attributes]] [/B] [/C] [/D] [/L] [/N]

  [/O[[:]sortorder]] [/P] [/Q] [/R] [/S] [/T[[:]timefield]] [/W] [/X] [/4]

 

  [drive:][path][filename]

              Specifies drive, directory, and/or files to list.

 

  /A          Displays files with specified attributes.

  attributes   D  Directories                R  Read-only files

               H  Hidden files               A  Files ready for archiving

               S  System files               I  Not content indexed files

               L  Reparse Points             O  Offline files

               -  Prefix meaning not

  /B          Uses bare format (no heading information or summary).

  /C          Display the thousand separator in file sizes.  This is the

              default.  Use /-C to disable display of separator.

  /D          Same as wide but files are list sorted by column.

  /L          Uses lowercase.

  /N          New long list format where filenames are on the far right.

  /O          List by files in sorted order.

  sortorder    N  By name (alphabetic)       S  By size (smallest first)

               E  By extension (alphabetic)  D  By date/time (oldest first)

               G  Group directories first    -  Prefix to reverse order

  /P          Pauses after each screenful of information.

  /Q          Display the owner of the file.

  /R          Display alternate data streams of the file.

  /S          Displays files in specified directory and all subdirectories.

  /T          Controls which time field displayed or used for sorting

  timefield   C  Creation

              A  Last Access

              W  Last Written

  /W          Uses wide list format.

  /X          This displays the short names generated for non-8dot3 file

              names.  The format is that of /N with the short name inserted

              before the long name. If no short name is present, blanks are

              displayed in its place.

  /4          Displays four-digit years

 

Switches may be preset in the DIRCMD environment variable.  Override

preset switches by prefixing any switch with - (hyphen)--for example, /-W.

D

 

DOSKEY

 

Edits command lines, recalls Windows commands, and creates macros.

 

DOSKEY [/REINSTALL] [/LISTSIZE=size] [/MACROS[:ALL | :exename]]

  [/HISTORY] [/INSERT | /OVERSTRIKE] [/EXENAME=exename] [/MACROFILE=filename]

  [macroname=[text]]

 

  /REINSTALL          Installs a new copy of Doskey.

  /LISTSIZE=size      Sets size of command history buffer.

  /MACROS             Displays all Doskey macros.

  /MACROS:ALL         Displays all Doskey macros for all executables which have

                      Doskey macros.

  /MACROS:exename     Displays all Doskey macros for the given executable.

  /HISTORY            Displays all commands stored in memory.

  /INSERT             Specifies that new text you type is inserted in old text.

  /OVERSTRIKE         Specifies that new text overwrites old text.

  /EXENAME=exename    Specifies the executable.

  /MACROFILE=filename Specifies a file of macros to install.

  macroname           Specifies a name for a macro you create.

  text                Specifies commands you want to record.

 

UP and DOWN ARROWS recall commands; ESC clears command line; F7 displays

command history; ALT+F7 clears command history; F8 searches command

history; F9 selects a command by number; ALT+F10 clears macro definitions.

 

The following are some special codes in Doskey macro definitions:

$T     Command separator.  Allows multiple commands in a macro.

$1-$9  Batch parameters.  Equivalent to %1-%9 in batch programs.

$*     Symbol replaced by everything following macro name on command line.

DRIVERQUERY

 

 

DRIVERQUERY [/S system [/U username [/P [password]]]]

              [/FO format] [/NH] [/SI] [/V]

Description:

    Enables an administrator to display a list of

    installed device drivers.

 

Parameter List:

      /S     system           Specifies the remote system to connect to.

 

      /U     [domain\]user    Specifies the user context

                              under which the command should execute.

 

      /P     [password]       Specify the password for the given

                              user context.

 

      /FO    format           Specifies the type of output to display.

                              Valid values to be passed with the

                              switch are "TABLE", "LIST", "CSV".

 

      /NH                     Specifies that the "Column Header"

                              should not be displayed. Valid for 

                              "TABLE" and "CSV" format only.

 

      /SI                     Provides information about signed drivers.

 

      /V                      Displays verbose output. Not valid

                              for signed drivers.

 

      /?                      Displays this help message.

 

Examples:

    DRIVERQUERY

    DRIVERQUERY /FO CSV /SI

    DRIVERQUERY /NH

    DRIVERQUERY /S ipaddress /U user /V

    DRIVERQUERY /S system /U domain\user /P password /FO LIST

ECHO

 

Displays messages, or turns command-echoing on or off.

 

  ECHO [ON | OFF]

  ECHO [message]

 

Type ECHO without parameters to display the current echo setting.

ENDLOCAL

 

Ends localization of environment changes in a batch file.

Environment changes made after ENDLOCAL has been issued are

not local to the batch file; the previous settings are not

restored on termination of the batch file.

 

ENDLOCAL

 

If Command Extensions are enabled ENDLOCAL changes as follows:

 

If the corresponding SETLOCAL enable or disabled command extensions

using the new ENABLEEXTENSIONS or DISABLEEXTENSIONS options, then

after the ENDLOCAL, the enabled/disabled state of command extensions

will be restored to what it was prior to the matching SETLOCAL

command execution.

ERASE

 

Deletes one or more files.

 

DEL [/P] [/F] [/S] [/Q] [/A[[:]attributes]] names

ERASE [/P] [/F] [/S] [/Q] [/A[[:]attributes]] names

 

  names         Specifies a list of one or more files or directories.

                Wildcards may be used to delete multiple files. If a

                directory is specified, all files within the directory

                will be deleted.

 

  /P            Prompts for confirmation before deleting each file.

  /F            Force deleting of read-only files.

  /S            Delete specified files from all subdirectories.

  /Q            Quiet mode, do not ask if ok to delete on global wildcard

  /A            Selects files to delete based on attributes

  attributes    R  Read-only files            S  System files

                H  Hidden files               A  Files ready for archiving

                I  Not content indexed Files  L  Reparse Points

                O  Offline files              -  Prefix meaning not

 

If Command Extensions are enabled DEL and ERASE change as follows:

 

The display semantics of the /S switch are reversed in that it shows

you only the files that are deleted, not the ones it could not find.

EXIT

 

Quits the CMD.EXE program (command interpreter) or the current batch

script.

 

EXIT [/B] [exitCode]

 

  /B          specifies to exit the current batch script instead of

              CMD.EXE.  If executed from outside a batch script, it

              will quit CMD.EXE

 

  exitCode    specifies a numeric number.  if /B is specified, sets

              ERRORLEVEL that number.  If quitting CMD.EXE, sets the process

              exit code with that number.

 

If Command Extensions are enabled EXIT changes as follows:

 

Executing EXIT /B after a CALL with a target label will return control

to the statement immediately following the CALL.

FC

 

Compares two files or sets of files and displays the differences between

them

 

 

FC [/A] [/C] [/L] [/LBn] [/N] [/OFF[LINE]] [/T] [/U] [/W] [/nnnn]

   [drive1:][path1]filename1 [drive2:][path2]filename2

FC /B [drive1:][path1]filename1 [drive2:][path2]filename2

 

  /A         Displays only first and last lines for each set of differences.

  /B         Performs a binary comparison.

  /C         Disregards the case of letters.

  /L         Compares files as ASCII text.

  /LBn       Sets the maximum consecutive mismatches to the specified

             number of lines.

  /N         Displays the line numbers on an ASCII comparison.

  /OFF[LINE] Do not skip files with offline attribute set.

  /T         Does not expand tabs to spaces.

  /U         Compare files as UNICODE text files.

  /W         Compresses white space (tabs and spaces) for comparison.

  /nnnn      Specifies the number of consecutive lines that must match

             after a mismatch.

  [drive1:][path1]filename1

             Specifies the first file or set of files to compare.

  [drive2:][path2]filename2

             Specifies the second file or set of files to compare.

 

FIND

 

Searches for a text string in a file or files.

 

FIND [/V] [/C] [/N] [/I] [/OFF[LINE]] "string" [[drive:][path]filename[ ...]]

 

  /V         Displays all lines NOT containing the specified string.

  /C         Displays only the count of lines containing the string.

  /N         Displays line numbers with the displayed lines.

  /I         Ignores the case of characters when searching for the string.

  /OFF[LINE] Do not skip files with offline attribute set.

  "string"   Specifies the text string to find.

  [drive:][path]filename

             Specifies a file or files to search.

 

If a path is not specified, FIND searches the text typed at the prompt

or piped from another command.

FINDSTR

 

Searches for strings in files.

 

FINDSTR [/B] [/E] [/L] [/R] [/S] [/I] [/X] [/V] [/N] [/M] [/O] [/P] [/F:file]

        [/C:string] [/G:file] [/D:dir list] [/A:color attributes] [/OFF[LINE]]

        strings [[drive:][path]filename[ ...]]

 

  /B         Matches pattern if at the beginning of a line.

  /E         Matches pattern if at the end of a line.

  /L         Uses search strings literally.

  /R         Uses search strings as regular expressions.

  /S         Searches for matching files in the current directory and all

             subdirectories.

  /I         Specifies that the search is not to be case-sensitive.

  /X         Prints lines that match exactly.

  /V         Prints only lines that do not contain a match.

  /N         Prints the line number before each line that matches.

  /M         Prints only the filename if a file contains a match.

  /O         Prints character offset before each matching line.

  /P         Skip files with non-printable characters.

  /OFF[LINE] Do not skip files with offline attribute set.

  /A:attr    Specifies color attribute with two hex digits. See "color /?"

  /F:file    Reads file list from the specified file(/ stands for console).

  /C:string  Uses specified string as a literal search string.

  /G:file    Gets search strings from the specified file(/ stands for console).

  /D:dir     Search a semicolon delimited list of directories

  /Q:qflags  Quiet mode flags:

             u           Suppress warning about unsupported Unicode formats

  strings    Text to be searched for.

  [drive:][path]filename

             Specifies a file or files to search.

 

Use spaces to separate multiple search strings unless the argument is prefixed

with /C.  For example, 'FINDSTR "hello there" x.y' searches for "hello" or

"there" in file x.y.  'FINDSTR /C:"hello there" x.y' searches for

"hello there" in file x.y.

 

Regular expression quick reference:

  .        Wildcard: any character

  *        Repeat: zero or more occurrences of previous character or class

  ^        Line position: beginning of line

  $        Line position: end of line

  [class]  Character class: any one character in set

  [^class] Inverse class: any one character not in set

  [x-y]    Range: any characters within the specified range

  \x       Escape: literal use of metacharacter x

  \<xyz    Word position: beginning of word

  xyz\>    Word position: end of word

 

For full information on FINDSTR regular expressions refer to the online Command

Reference.

FOR

 

Runs a specified command for each file in a set of files.

 

FOR %variable IN (set) DO command [command-parameters]

 

  %variable  Specifies a single letter replaceable parameter.

  (set)      Specifies a set of one or more files.  Wildcards may be used.

  command    Specifies the command to carry out for each file.

  command-parameters

             Specifies parameters or switches for the specified command.

 

To use the FOR command in a batch program, specify %%variable instead

of %variable.  Variable names are case sensitive, so %i is different

from %I.

 

If Command Extensions are enabled, the following additional

forms of the FOR command are supported:

 

FOR /D %variable IN (set) DO command [command-parameters]

 

    If set contains wildcards, then specifies to match against directory

    names instead of file names.

 

FOR /R [[drive:]path] %variable IN (set) DO command [command-parameters]

 

    Walks the directory tree rooted at [drive:]path, executing the FOR

    statement in each directory of the tree.  If no directory

    specification is specified after /R then the current directory is

    assumed.  If set is just a single period (.) character then it

    will just enumerate the directory tree.

 

FOR /L %variable IN (start,step,end) DO command [command-parameters]

 

    The set is a sequence of numbers from start to end, by step amount.

    So (1,1,5) would generate the sequence 1 2 3 4 5 and (5,-1,1) would

    generate the sequence (5 4 3 2 1)

 

FOR /F ["options"] %variable IN (file-set) DO command [command-parameters]

FOR /F ["options"] %variable IN ("string") DO command [command-parameters]

FOR /F ["options"] %variable IN ('command') DO command [command-parameters]

 

    or, if usebackq option present:

 

FOR /F ["options"] %variable IN (file-set) DO command [command-parameters]

FOR /F ["options"] %variable IN ('string') DO command [command-parameters]

FOR /F ["options"] %variable IN (`command`) DO command [command-parameters]

 

    file-set is one or more file names.  Each file is opened, read

    and processed before going on to the next file in file-set.

    Processing consists of reading in the file, breaking it up into

    individual lines of text and then parsing each line into zero or

    more tokens.  The body of the for loop is then called with the

    variable value(s) set to the found token string(s).  By default, /F

    passes the first blank separated token from each line of each file.

    Blank lines are skipped.  You can override the default parsing

    behavior by specifying the optional "options" parameter.  This

    is a quoted string which contains one or more keywords to specify

    different parsing options.  The keywords are:

 

        eol=c           - specifies an end of line comment character

                          (just one)

        skip=n          - specifies the number of lines to skip at the

                          beginning of the file.

        delims=xxx      - specifies a delimiter set.  This replaces the

                          default delimiter set of space and tab.

        tokens=x,y,m-n  - specifies which tokens from each line are to

                          be passed to the for body for each iteration.

                          This will cause additional variable names to

                          be allocated.  The m-n form is a range,

                          specifying the mth through the nth tokens.  If

                          the last character in the tokens= string is an

                          asterisk, then an additional variable is

                          allocated and receives the remaining text on

                          the line after the last token parsed.

        usebackq        - specifies that the new semantics are in force,

                          where a back quoted string is executed as a

                          command and a single quoted string is a

                          literal string command and allows the use of

                          double quotes to quote file names in

                          file-set.

 

    Some examples might help:

 

FOR /F "eol=; tokens=2,3* delims=, " %i in (myfile.txt) do @echo %i %j %k

 

    would parse each line in myfile.txt, ignoring lines that begin with

    a semicolon, passing the 2nd and 3rd token from each line to the for

    body, with tokens delimited by commas and/or spaces.  Notice the for

    body statements reference %i to get the 2nd token, %j to get the

    3rd token, and %k to get all remaining tokens after the 3rd.  For

    file names that contain spaces, you need to quote the filenames with

    double quotes.  In order to use double quotes in this manner, you also

    need to use the usebackq option, otherwise the double quotes will be

    interpreted as defining a literal string to parse.

 

    %i is explicitly declared in the for statement and the %j and %k

    are implicitly declared via the tokens= option.  You can specify up

    to 26 tokens via the tokens= line, provided it does not cause an

    attempt to declare a variable higher than the letter 'z' or 'Z'.

    Remember, FOR variables are single-letter, case sensitive, global,

    and you can't have more than 52 total active at any one time.

 

    You can also use the FOR /F parsing logic on an immediate string, by

    making the file-set between the parenthesis a quoted string,

    using single quote characters.  It will be treated as a single line

    of input from a file and parsed.

 

    Finally, you can use the FOR /F command to parse the output of a

    command.  You do this by making the file-set between the

    parenthesis a back quoted string.  It will be treated as a command

    line, which is passed to a child CMD.EXE and the output is captured

    into memory and parsed as if it was a file.  So the following

    example:

 

      FOR /F "usebackq delims==" %i IN (`set`) DO @echo %i

 

    would enumerate the environment variable names in the current

    environment.

 

In addition, substitution of FOR variable references has been enhanced.

You can now use the following optional syntax:

 

    %~I         - expands %I removing any surrounding quotes (")

    %~fI        - expands %I to a fully qualified path name

    %~dI        - expands %I to a drive letter only

    %~pI        - expands %I to a path only

    %~nI        - expands %I to a file name only

    %~xI        - expands %I to a file extension only

    %~sI        - expanded path contains short names only

    %~aI        - expands %I to file attributes of file

    %~tI        - expands %I to date/time of file

    %~zI        - expands %I to size of file

    %~$PATH:I   - searches the directories listed in the PATH

                   environment variable and expands %I to the

                   fully qualified name of the first one found.

                   If the environment variable name is not

                   defined or the file is not found by the

                   search, then this modifier expands to the

                   empty string

 

The modifiers can be combined to get compound results:

 

    %~dpI       - expands %I to a drive letter and path only

    %~nxI       - expands %I to a file name and extension only

    %~fsI       - expands %I to a full path name with short names only

    %~dp$PATH:I - searches the directories listed in the PATH

                   environment variable for %I and expands to the

                   drive letter and path of the first one found.

    %~ftzaI     - expands %I to a DIR like output line

 

In the above examples %I and PATH can be replaced by other valid

values.  The %~ syntax is terminated by a valid FOR variable name.

Picking upper case variable names like %I makes it more readable and

avoids confusion with the modifiers, which are not case sensitive.

FORMAT

 

Formats a disk for use with Windows.

 

FORMAT volume [/FS:file-system] [/V:label] [/Q] [/L[:state]] [/A:size] [/C] [/I:state] [/X] [/P:passes] [/S:state]

FORMAT volume [/V:label] [/Q] [/F:size] [/P:passes]

FORMAT volume [/V:label] [/Q] [/T:tracks /N:sectors] [/P:passes]

FORMAT volume [/V:label] [/Q] [/P:passes]

FORMAT volume [/Q]

 

  volume          Specifies the drive letter (followed by a colon),

                  mount point, or volume name.

  /FS:filesystem  Specifies the type of the file system (FAT, FAT32, exFAT,

                  NTFS, UDF, ReFS).

  /V:label        Specifies the volume label.

  /Q              Performs a quick format. Note that this switch overrides /P.

  /C              NTFS only: Files created on the new volume will be compressed

                  by default.

  /X              Forces the volume to dismount first if necessary.  All opened

                  handles to the volume would no longer be valid.

  /R:revision     UDF only: Forces the format to a specific UDF version

                  (1.02, 1.50, 2.00, 2.01, 2.50).  The default

                  revision is 2.01.

  /D              UDF 2.50 only: Metadata will be duplicated.

  /L[:state]      NTFS Only: Overrides the default size of file record.

                  By default, a non-tiered volume will be formatted with small

                  size file records and a tiered volume will be formatted with

                  large size file records.  /L and /L:enable forces format to

                  use large size file records and /L:disable forces format to

                  use small size file records.

  /A:size         Overrides the default allocation unit size. Default settings

                  are strongly recommended for general use.

                  ReFS supports 4096, 64K.

                  NTFS supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K,

                  128K, 256K, 512K, 1M, 2M.

                  FAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K,

                  (128K, 256K for sector size > 512 bytes).

                  FAT32 supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K,

                  (128K, 256K for sector size > 512 bytes).

                  exFAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K,

                  128K, 256K, 512K, 1M, 2M, 4M, 8M, 16M, 32M.

 

                  Note that the FAT and FAT32 files systems impose the

                  following restrictions on the number of clusters on a volume:

 

                  FAT: Number of clusters <= 65526

                  FAT32: 65526 < Number of clusters < 4177918

 

                  Format will immediately stop processing if it decides that

                  the above requirements cannot be met using the specified

                  cluster size.

 

                  NTFS compression is not supported for allocation unit sizes

                  above 4096.

 

  /F:size         Specifies the size of the floppy disk to format (1.44)

  /T:tracks       Specifies the number of tracks per disk side.

  /N:sectors      Specifies the number of sectors per track.

  /P:count        Overwrite the volume "count" times using a different random

                  number each time followed by writing zeros to every sector.

                  If "count" is zero, we'll just zero every sector on the

                  volume. This switch is ignored when /Q is specified.

  /S:state        Specifies support for short filenames (enable, disable)

                  Short names are disabled by default

  /TXF:state      Specifies if txf should be enabled/disabled (enable, disable)

                  TxF is enabled by default

  /I:state        ReFS only: Specifies whether integrity should be enabled on

                  the new volume. "state" is either "enable" or "disable"

                  Integrity is enabled on storage that supports data redundancy

                  by default.

  /DAX[:state]    NTFS Only: Enable direct access storage (DAX) mode for this

                  volume.  In DAX mode, the volume is accessed via the memory

                  bus, boosting IO performance.  A volume can be formatted

                  with DAX mode only if the hardware is DAX capable.

                  State can specify "enable" or "disable".  /DAX is considered

                  as /DAX:enable.

  /LogSize[:size] NTFS Only: Specifies the size for NTFS log file in kilobytes.

                  The minimum supported size is 2MB, so specifying size smaller

                  than 2MB will result in a 2MB log file.  Zero indicates the

                  default value which generally depend on the volume size.

  /NoRepairLogs   NTFS Only: Disables NTFS repair logs.  If the flag is set

                  spotfix (i.e. chkdsk /spotfix) will not work.

  /NoTrim         Skip sending trim (delete notification) during format.

  /DevDrv         ReFS Only: Format the volume as a dev drive.  A dev drive or

                  a developer volume, is a volume optimized for performance of

                  developer scenarios.  Gives administrators control over what

                  mini-filters are attached to this volume.

  /SHA256Checksums ReFS Only: Use SHA-256 in all operations involving checksums.

  /Y              No prompt, force the volume to dismount if necessary

                  and assumes empty label when no label is specified.

FSUTIL

 

/? is an invalid parameter.

---- Commands Supported ----

 

8dot3name         8dot3name management

behavior          Control file system behavior

bypassIo          BypassIo management

clfs              CLFS logfile management

dax               Dax volume management

devdrv            Developer volume management

dirty             Manage volume dirty bit

file              File specific commands

fsInfo            File system information

hardlink          Hard link management

objectID          Object ID management

quota             Quota management

repair            Self healing management

reparsePoint      Reparse point management

storageReserve    Storage Reserve management

resource          Transactional Resource Manager management

sparse            Sparse file control

tiering           Storage tiering property management

trace             File system trace management

transaction       Transaction management

usn               USN management

volume            Volume management

wim               Transparent wim hosting management

FTYPE

 

Displays or modifies file types used in file extension associations

 

FTYPE [fileType[=[openCommandString]]]

 

  fileType  Specifies the file type to examine or change

  openCommandString Specifies the open command to use when launching files

                    of this type.

 

Type FTYPE without parameters to display the current file types that

have open command strings defined.  FTYPE is invoked with just a file

type, it displays the current open command string for that file type.

Specify nothing for the open command string and the FTYPE command will

delete the open command string for the file type.  Within an open

command string %0 or %1 are substituted with the file name being

launched through the assocation.  %* gets all the parameters and %2

gets the 1st parameter, %3 the second, etc.  %~n gets all the remaining

parameters starting with the nth parameter, where n may be between 2 and 9,

inclusive.  For example:

 

    ASSOC .pl=PerlScript

    FTYPE PerlScript=perl.exe %1 %*

 

would allow you to invoke a Perl script as follows:

 

    script.pl 1 2 3

 

If you want to eliminate the need to type the extensions, then do the

following:

 

    set PATHEXT=.pl;%PATHEXT%

 

and the script could be invoked as follows:

 

    script 1 2 3

GOTO

 

Directs cmd.exe to a labeled line in a batch program.

 

GOTO label

 

  label   Specifies a text string used in the batch program as a label.

 

You type a label on a line by itself, beginning with a colon.

 

If Command Extensions are enabled GOTO changes as follows:

 

GOTO command now accepts a target label of :EOF which transfers control

to the end of the current batch script file.  This is an easy way to

exit a batch script file without defining a label.  Type CALL /?  for a

description of extensions to the CALL command that make this feature

useful.

 

Executing GOTO :EOF after a CALL with a target label will return control

to the statement immediately following the CALL.

GPRESULT

 

 

GPRESULT [/S system [/U username [/P [password]]]] [/SCOPE scope]

           [/USER targetusername] [/R | /V | /Z] [(/X | /H) <filename> [/F]]

 

Description:

    This command line tool displays the Resultant Set of Policy (RSoP)

    information for a target user and computer.

 

Parameter List:

    /S        system           Specifies the remote system to connect to.

 

    /U        [domain\]user    Specifies the user context under which the

                               command should run.

                               Can not be used with /X, /H.

 

    /P        [password]       Specifies the password for the given user

                               context. Prompts for input if omitted.

                               Cannot be used with /X, /H.

 

    /SCOPE    scope            Specifies whether the user or the

                               computer settings need to be displayed.

                               Valid values: "USER", "COMPUTER".

 

    /USER     [domain\]user    Specifies the user name for which the

                               RSoP data is to be displayed.

 

    /X        <filename>       Saves the report in XML format at the

                               location and with the file name specified

                               by the <filename> parameter. (valid in Windows

                               Vista SP1 and later and Windows Server 2008 and later)

 

    /H        <filename>       Saves the report in HTML format at the

                               location and with the file name specified by

                               the <filename> parameter. (valid in Windows

                               at least Vista SP1 and at least Windows Server 2008)

 

    /F                         Forces Gpresult to overwrite the file name

                               specified in the /X or /H command.

 

    /R                         Displays RSoP summary data.

 

    /V                         Specifies that verbose information should

                               be displayed. Verbose information provides

                               additional detailed settings that have

                               been applied with a precedence of 1.

 

    /Z                         Specifies that the super-verbose

                               information should be displayed. Super-

                               verbose information provides additional

                               detailed settings that have been applied

                               with a precedence of 1 and higher. This

                               allows you to see if a setting was set in

                               multiple places. See the Group Policy

                               online help topic for more information.

 

    /?                         Displays this help message.

 

 

Examples:

    GPRESULT /R

    GPRESULT /H GPReport.html

    GPRESULT /USER targetusername /V

    GPRESULT /S system /USER targetusername /SCOPE COMPUTER /Z

    GPRESULT /S system /U username /P password /SCOPE USER /V

HELP

 

Provides help information for Windows commands.

 

HELP [command]

 

    command - displays help information on that command.

ICACLS

 

 

ICACLS name /save aclfile [/T] [/C] [/L] [/Q]

    stores the DACLs for the files and folders that match the name

    into aclfile for later use with /restore. Note that SACLs,

    owner, or integrity labels are not saved.

 

ICACLS directory [/substitute SidOld SidNew [...]] /restore aclfile

                 [/C] [/L] [/Q]

    applies the stored DACLs to files in directory.

 

ICACLS name /setowner user [/T] [/C] [/L] [/Q]

    changes the owner of all matching names. This option does not

    force a change of ownership; use the takeown.exe utility for

    that purpose.

 

ICACLS name /findsid Sid [/T] [/C] [/L] [/Q]

    finds all matching names that contain an ACL

    explicitly mentioning Sid.

 

ICACLS name /verify [/T] [/C] [/L] [/Q]

    finds all files whose ACL is not in canonical form or whose

    lengths are inconsistent with ACE counts.

 

ICACLS name /reset [/T] [/C] [/L] [/Q]

    replaces ACLs with default inherited ACLs for all matching files.

 

ICACLS name [/grant[:r] Sid:perm[...]]

       [/deny Sid:perm [...]]

       [/remove[:g|:d]] Sid[...]] [/T] [/C] [/L] [/Q]

       [/setintegritylevel Level:policy[...]]

 

    /grant[:r] Sid:perm grants the specified user access rights. With :r,

        the permissions replace any previously granted explicit permissions.

        Without :r, the permissions are added to any previously granted

        explicit permissions.

 

    /deny Sid:perm explicitly denies the specified user access rights.

        An explicit deny ACE is added for the stated permissions and

        the same permissions in any explicit grant are removed.

 

    /remove[:[g|d]] Sid removes all occurrences of Sid in the ACL. With

        :g, it removes all occurrences of granted rights to that Sid. With

        :d, it removes all occurrences of denied rights to that Sid.

 

    /setintegritylevel [(CI)(OI)]Level explicitly adds an integrity

        ACE to all matching files.  The level is to be specified as one

        of:

            L[ow]

            M[edium]

            H[igh]

        Inheritance options for the integrity ACE may precede the level

        and are applied only to directories.

 

    /inheritance:e|d|r

        e - enables inheritance

        d - disables inheritance and copy the ACEs

        r - remove all inherited ACEs

 

 

Note:

    Sids may be in either numerical or friendly name form. If a numerical

    form is given, affix a * to the start of the SID.

 

    /T indicates that this operation is performed on all matching

        files/directories below the directories specified in the name.

 

    /C indicates that this operation will continue on all file errors.

        Error messages will still be displayed.

 

    /L indicates that this operation is performed on a symbolic link

       itself versus its target.

 

    /Q indicates that icacls should suppress success messages.

 

    ICACLS preserves the canonical ordering of ACE entries:

            Explicit denials

            Explicit grants

            Inherited denials

            Inherited grants

 

    perm is a permission mask and can be specified in one of two forms:

        a sequence of simple rights:

                N - no access

                F - full access

                M - modify access

                RX - read and execute access

                R - read-only access

                W - write-only access

                D - delete access

        a comma-separated list in parentheses of specific rights:

                DE - delete

                RC - read control

                WDAC - write DAC

                WO - write owner

                S - synchronize

                AS - access system security

                MA - maximum allowed

                GR - generic read

                GW - generic write

                GE - generic execute

                GA - generic all

                RD - read data/list directory

                WD - write data/add file

                AD - append data/add subdirectory

                REA - read extended attributes

                WEA - write extended attributes

                X - execute/traverse

                DC - delete child

                RA - read attributes

                WA - write attributes

        inheritance rights may precede either form and are applied

        only to directories:

                (OI) - object inherit

                (CI) - container inherit

                (IO) - inherit only

                (NP) - don't propagate inherit

                (I) - permission inherited from parent container

 

Examples:

 

        icacls c:\windows\* /save AclFile /T

        - Will save the ACLs for all files under c:\windows

          and its subdirectories to AclFile.

 

        icacls c:\windows\ /restore AclFile

        - Will restore the Acls for every file within

          AclFile that exists in c:\windows and its subdirectories.

 

        icacls file /grant Administrator:(D,WDAC)

        - Will grant the user Administrator Delete and Write DAC

          permissions to file.

 

        icacls file /grant *S-1-1-0:(D,WDAC)

        - Will grant the user defined by sid S-1-1-0 Delete and

          Write DAC permissions to file.

IF

 

Performs conditional processing in batch programs.

 

IF [NOT] ERRORLEVEL number command

IF [NOT] string1==string2 command

IF [NOT] EXIST filename command

 

  NOT               Specifies that Windows should carry out

                    the command only if the condition is false.

 

  ERRORLEVEL number Specifies a true condition if the last program run

                    returned an exit code equal to or greater than the number

                    specified.

 

  string1==string2  Specifies a true condition if the specified text strings

                    match.

 

  EXIST filename    Specifies a true condition if the specified filename

                    exists.

 

  command           Specifies the command to carry out if the condition is

                    met.  Command can be followed by ELSE command which

                    will execute the command after the ELSE keyword if the

                    specified condition is FALSE

 

The ELSE clause must occur on the same line as the command after the IF.  For

example:

 

    IF EXIST filename. (

        del filename.

    ) ELSE (

        echo filename. missing.

    )

 

The following would NOT work because the del command needs to be terminated

by a newline:

 

    IF EXIST filename. del filename. ELSE echo filename. missing

 

Nor would the following work, since the ELSE command must be on the same line

as the end of the IF command:

 

    IF EXIST filename. del filename.

    ELSE echo filename. missing

 

The following would work if you want it all on one line:

 

    IF EXIST filename. (del filename.) ELSE echo filename. missing

 

If Command Extensions are enabled IF changes as follows:

 

    IF [/I] string1 compare-op string2 command

    IF CMDEXTVERSION number command

    IF DEFINED variable command

 

where compare-op may be one of:

 

    EQU - equal

    NEQ - not equal

    LSS - less than

    LEQ - less than or equal

    GTR - greater than

    GEQ - greater than or equal

 

and the /I switch, if specified, says to do case insensitive string

compares.  The /I switch can also be used on the string1==string2 form

of IF.  These comparisons are generic, in that if both string1 and

string2 are both comprised of all numeric digits, then the strings are

converted to numbers and a numeric comparison is performed.

 

The CMDEXTVERSION conditional works just like ERRORLEVEL, except it is

comparing against an internal version number associated with the Command

Extensions.  The first version is 1.  It will be incremented by one when

significant enhancements are added to the Command Extensions.

CMDEXTVERSION conditional is never true when Command Extensions are

disabled.

 

The DEFINED conditional works just like EXIST except it takes an

environment variable name and returns true if the environment variable

is defined.

 

%ERRORLEVEL% will expand into a string representation of

the current value of ERRORLEVEL, provided that there is not already

an environment variable with the name ERRORLEVEL, in which case you

will get its value instead.  After running a program, the following

illustrates ERRORLEVEL use:

 

    goto answer%ERRORLEVEL%

    :answer0

    echo Program had return code 0

    :answer1

    echo Program had return code 1

 

You can also use numerical comparisons above:

 

    IF %ERRORLEVEL% LEQ 1 goto okay

 

%CMDCMDLINE% will expand into the original command line passed to

CMD.EXE prior to any processing by CMD.EXE, provided that there is not

already an environment variable with the name CMDCMDLINE, in which case

you will get its value instead.

 

%CMDEXTVERSION% will expand into a string representation of the

current value of CMDEXTVERSION, provided that there is not already

an environment variable with the name CMDEXTVERSION, in which case you

will get its value instead.

LABEL

 

Creates, changes, or deletes the volume label of a disk.

 

LABEL [drive:][label]

LABEL [/MP] [volume] [label]

 

  drive:          Specifies the drive letter of a drive.

  label           Specifies the label of the volume.

  /MP             Specifies that the volume should be treated as a

                  mount point or volume name.

  volume          Specifies the drive letter (followed by a colon),

                  mount point, or volume name.  If volume name is specified,

                  the /MP flag is unnecessary.

MD

 

Creates a directory.

 

MKDIR [drive:]path

MD [drive:]path

 

If Command Extensions are enabled MKDIR changes as follows:

 

MKDIR creates any intermediate directories in the path, if needed.

For example, assume \a does not exist then:

 

    mkdir \a\b\c\d

 

is the same as:

 

    mkdir \a

    chdir \a

    mkdir b

    chdir b

    mkdir c

    chdir c

    mkdir d

 

which is what you would have to type if extensions were disabled.

MKDIR

 

Creates a directory.

 

MKDIR [drive:]path

MD [drive:]path

 

If Command Extensions are enabled MKDIR changes as follows:

 

MKDIR creates any intermediate directories in the path, if needed.

For example, assume \a does not exist then:

 

    mkdir \a\b\c\d

 

is the same as:

 

    mkdir \a

    chdir \a

    mkdir b

    chdir b

    mkdir c

    chdir c

    mkdir d

 

which is what you would have to type if extensions were disabled.

MKLINK

 

Creates a symbolic link.

 

MKLINK [[/D] | [/H] | [/J]] Link Target

 

        /D      Creates a directory symbolic link.  Default is a file

                symbolic link.

        /H      Creates a hard link instead of a symbolic link.

        /J      Creates a Directory Junction.

        Link    Specifies the new symbolic link name.

        Target  Specifies the path (relative or absolute) that the new link

                refers to.

MODE

 

Configures system devices.

 

Serial port:       MODE COMm[:] [BAUD=b] [PARITY=p] [DATA=d] [STOP=s]

                                [to=on|off] [xon=on|off] [odsr=on|off]

                                [octs=on|off] [dtr=on|off|hs]

                                [rts=on|off|hs|tg] [idsr=on|off]

 

Device Status:     MODE [device] [/STATUS]

 

Redirect printing: MODE LPTn[:]=COMm[:]

 

Select code page:  MODE CON[:] CP SELECT=yyy

 

Code page status:  MODE CON[:] CP [/STATUS]

 

Display mode:      MODE CON[:] [COLS=c] [LINES=n]

 

Typematic rate:    MODE CON[:] [RATE=r DELAY=d]

MORE

 

Displays output one screen at a time.

 

MORE [/E [/C] [/P] [/S] [/Tn] [+n]] < [drive:][path]filename

command-name | MORE [/E [/C] [/P] [/S] [/Tn] [+n]]

MORE /E [/C] [/P] [/S] [/Tn] [+n] [files]

 

    [drive:][path]filename  Specifies a file to display one

                            screen at a time.

 

    command-name            Specifies a command whose output

                            will be displayed.

 

    /E      Enable extended features

    /C      Clear screen before displaying page

    /P      Expand FormFeed characters

    /S      Squeeze multiple blank lines into a single line

    /Tn     Expand tabs to n spaces (default 8)

 

            Switches can be present in the MORE environment

            variable.

 

    +n      Start displaying the first file at line n

 

    files   List of files to be displayed. Files in the list

            are separated by blanks.

 

    If extended features are enabled, the following commands

    are accepted at the -- More -- prompt:

 

    P n     Display next n lines

    S n     Skip next n lines

    F       Display next file

    Q       Quit

    =       Show line number

    ?       Show help line

    <space> Display next page

    <ret>   Display next line

MOVE

 

Moves files and renames files and directories.

 

To move one or more files:

MOVE [/Y | /-Y] [drive:][path]filename1[,...] destination

 

To rename a directory:

MOVE [/Y | /-Y] [drive:][path]dirname1 dirname2

 

  [drive:][path]filename1 Specifies the location and name of the file

                          or files you want to move.

  destination             Specifies the new location of the file. Destination

                          can consist of a drive letter and colon, a

                          directory name, or a combination. If you are moving

                          only one file, you can also include a filename if

                          you want to rename the file when you move it.

  [drive:][path]dirname1  Specifies the directory you want to rename.

  dirname2                Specifies the new name of the directory.

 

  /Y                      Suppresses prompting to confirm you want to

                          overwrite an existing destination file.

  /-Y                     Causes prompting to confirm you want to overwrite

                          an existing destination file.

 

The switch /Y may be present in the COPYCMD environment variable.

This may be overridden with /-Y on the command line.  Default is

to prompt on overwrites unless MOVE command is being executed from

within a batch script.

OPENFILES

 

 

OPENFILES /parameter [arguments]

 

Description:

    Enables an administrator to list or disconnect files and folders

    that have been opened on a system.

 

Parameter List:

    /Disconnect      Disconnects one or more open files.

 

    /Query           Displays files opened locally or from shared

                     folders.

 

    /Local           Enables / Disables the display of local open files.

 

    /?               Displays this help message.

 

Examples:

    OPENFILES /Disconnect /?

    OPENFILES /Query /?

    OPENFILES /Local /?

PATH

 

Displays or sets a search path for executable files.

 

PATH [[drive:]path[;...][;%PATH%]

PATH ;

 

Type PATH ; to clear all search-path settings and direct cmd.exe to search

only in the current directory.

Type PATH without parameters to display the current path.

Including %PATH% in the new path setting causes the old path to be

appended to the new setting.

PAUSE

    Press any key to continue . . . PAUSE

 

Suspends processing of a batch program and displays the message

POPD

 

Changes to the directory stored by the PUSHD command.

 

POPD

 

 

If Command Extensions are enabled the POPD command will delete

any temporary drive letter created by PUSHD when you POPD that

drive off the pushed directory stack.

PRINT

 

Prints a text file.

 

PRINT [/D:device] [[drive:][path]filename[...]]

 

   /D:device   Specifies a print device.

 

PROMPT

 

Changes the cmd.exe command prompt.

 

PROMPT [text]

 

  text    Specifies a new command prompt.

 

Prompt can be made up of normal characters and the following special codes:

 

  $A   & (Ampersand)

  $B   | (pipe)

  $C   ( (Left parenthesis)

  $D   Current date

  $E   Escape code (ASCII code 27)

  $F   ) (Right parenthesis)

  $G   > (greater-than sign)

  $H   Backspace (erases previous character)

  $L   < (less-than sign)

  $N   Current drive

  $P   Current drive and path

  $Q   = (equal sign)

  $S     (space)

  $T   Current time

  $V   Windows version number

  $_   Carriage return and linefeed

  $$   $ (dollar sign)

 

If Command Extensions are enabled the PROMPT command supports

the following additional formatting characters:

 

  $+   zero or more plus sign (+) characters depending upon the

       depth of the PUSHD directory stack, one character for each

       level pushed.

 

  $M   Displays the remote name associated with the current drive

       letter or the empty string if current drive is not a network

       drive.

PUSHD

 

Stores the current directory for use by the POPD command, then

changes to the specified directory.

 

PUSHD [path | ..]

 

  path        Specifies the directory to make the current directory.

 

If Command Extensions are enabled the PUSHD command accepts

network paths in addition to the normal drive letter and path.

If a network path is specified, PUSHD will create a temporary

drive letter that points to that specified network resource and

then change the current drive and directory, using the newly

defined drive letter.  Temporary drive letters are allocated from

Z: on down, using the first unused drive letter found.

RD

 

Removes (deletes) a directory.

 

RMDIR [/S] [/Q] [drive:]path

RD [/S] [/Q] [drive:]path

 

    /S      Removes all directories and files in the specified directory

            in addition to the directory itself.  Used to remove a directory

            tree.

 

    /Q      Quiet mode, do not ask if ok to remove a directory tree with /S

RECOVER

 

Recovers readable information from a bad or defective disk.

 

RECOVER [drive:][path]filename

Consult the online Command Reference in Windows Help

before using the RECOVER command.

REM

 

Records comments (remarks) in a batch file or CONFIG.SYS.

 

REM [comment]

REN

 

Renames a file or files.

 

RENAME [drive:][path]filename1 filename2.

REN [drive:][path]filename1 filename2.

 

Note that you cannot specify a new drive or path for your destination file.

RENAME

 

Renames a file or files.

 

RENAME [drive:][path]filename1 filename2.

REN [drive:][path]filename1 filename2.

 

Note that you cannot specify a new drive or path for your destination file.

REPLACE

 

Replaces files.

 

REPLACE [drive1:][path1]filename [drive2:][path2] [/A] [/P] [/R] [/W]

REPLACE [drive1:][path1]filename [drive2:][path2] [/P] [/R] [/S] [/W] [/U]

 

  [drive1:][path1]filename Specifies the source file or files.

  [drive2:][path2]         Specifies the directory where files are to be

                           replaced.

  /A                       Adds new files to destination directory. Cannot

                           use with /S or /U switches.

  /P                       Prompts for confirmation before replacing a file or

                           adding a source file.

  /R                       Replaces read-only files as well as unprotected

                           files.

  /S                       Replaces files in all subdirectories of the

                           destination directory. Cannot use with the /A

                           switch.

  /W                       Waits for you to insert a disk before beginning.

  /U                       Replaces (updates) only files that are older than

                           source files. Cannot use with the /A switch.

RMDIR

 

Removes (deletes) a directory.

 

RMDIR [/S] [/Q] [drive:]path

RD [/S] [/Q] [drive:]path

 

    /S      Removes all directories and files in the specified directory

            in addition to the directory itself.  Used to remove a directory

            tree.

 

    /Q      Quiet mode, do not ask if ok to remove a directory tree with /S

ROBOCOPY

 

 

-------------------------------------------------------------------------------

   ROBOCOPY     ::     Robust File Copy for Windows                             

-------------------------------------------------------------------------------

 

  Started : November 16, 2026 4:15:06 PM

              Usage :: ROBOCOPY source destination [file [file]...] [options]

 

             source :: Source Directory (drive:\path or \\server\share\path).

        destination :: Destination Dir  (drive:\path or \\server\share\path).

               file :: File(s) to copy  (names/wildcards: default is "*.*").

 

::

:: Copy options :

::

                 /S :: copy Subdirectories, but not empty ones.

                 /E :: copy subdirectories, including Empty ones.

             /LEV:n :: only copy the top n LEVels of the source directory tree.

 

                 /Z :: copy files in restartable mode.

                 /B :: copy files in Backup mode.

                /ZB :: use restartable mode; if access denied use Backup mode.

                 /J :: copy using unbuffered I/O (recommended for large files).

            /EFSRAW :: copy all encrypted files in EFS RAW mode.

 

  /COPY:copyflag[s] :: what to COPY for files (default is /COPY:DAT).

                       (copyflags : D=Data, A=Attributes, T=Timestamps, X=Skip alt data streams (X ignored if /B or /ZB).

                       (S=Security=NTFS ACLs, O=Owner info, U=aUditing info).

 

 

               /SEC :: copy files with SECurity (equivalent to /COPY:DATS).

           /COPYALL :: COPY ALL file info (equivalent to /COPY:DATSOU).

            /NOCOPY :: COPY NO file info (useful with /PURGE).

            /SECFIX :: FIX file SECurity on all files, even skipped files.

            /TIMFIX :: FIX file TIMes on all files, even skipped files.

 

             /PURGE :: delete dest files/dirs that no longer exist in source.

               /MIR :: MIRror a directory tree (equivalent to /E plus /PURGE).

 

               /MOV :: MOVe files (delete from source after copying).

              /MOVE :: MOVE files AND dirs (delete from source after copying).

 

     /A+:[RASHCNET] :: add the given Attributes to copied files.

     /A-:[RASHCNETO]:: remove the given Attributes from copied files.

 

            /CREATE :: CREATE directory tree and zero-length files only.

               /FAT :: create destination files using 8.3 FAT file names only.

               /256 :: turn off very long path (> 256 characters) support.

 

             /MON:n :: MONitor source; run again when more than n changes seen.

             /MOT:m :: MOnitor source; run again in m minutes Time, if changed.

 

      /RH:hhmm-hhmm :: Run Hours - times when new copies may be started.

                /PF :: check run hours on a Per File (not per pass) basis.

 

             /IPG:n :: Inter-Packet Gap (ms), to free bandwidth on slow lines.

 

                /SJ :: copy Junctions as junctions instead of as the junction targets.

                /SL :: copy Symbolic Links as links instead of as the link targets.

 

            /MT[:n] :: Do multi-threaded copies with n threads (default 8).

                       n must be at least 1 and not greater than 128.

                       This option is incompatible with the /IPG and /EFSRAW options.

                       Redirect output using /LOG option for better performance.

 

 /DCOPY:copyflag[s] :: what to COPY for directories (default is /DCOPY:DA).

                       (copyflags : D=Data, A=Attributes, T=Timestamps, E=EAs, X=Skip alt data streams).

 

           /NODCOPY :: COPY NO directory info (by default /DCOPY:DA is done).

 

         /NOOFFLOAD :: copy files without using the Windows Copy Offload mechanism.

 

          /COMPRESS :: Request network compression during file transfer, if applicable.

 

      /SPARSE[:Y/N] :: Enable or disable retaining the sparse state during copy.

 

           /NOCLONE :: Do not attempt block cloning as an optimization.

::

:: Copy File Throttling Options :

::

  /IoMaxSize:n[KMG] :: Requested max i/o size per {read,write} cycle, in n [KMG] bytes.

 

     /IoRate:n[KMG] :: Requested i/o rate, in n [KMG] bytes per second.

 

  /Threshold:n[KMG] :: File size threshold for throttling, in n [KMG] bytes (see Remarks).

 

::

:: File Selection Options :

::

                 /A :: copy only files with the Archive attribute set.

                 /M :: copy only files with the Archive attribute and reset it.

    /IA:[RASHCNETO] :: Include only files with any of the given Attributes set.

    /XA:[RASHCNETO] :: eXclude files with any of the given Attributes set.

 

 /XF file [file]... :: eXclude Files matching given names/paths/wildcards.

 /XD dirs [dirs]... :: eXclude Directories matching given names/paths.

 

                /XC :: eXclude Changed files.

                /XN :: eXclude Newer files.

                /XO :: eXclude Older files.

                /XX :: eXclude eXtra files and directories.

                /XL :: eXclude Lonely files and directories.

                /IS :: Include Same files.

                /IT :: Include Tweaked files.

 

             /MAX:n :: MAXimum file size - exclude files bigger than n bytes.

             /MIN:n :: MINimum file size - exclude files smaller than n bytes.

 

          /MAXAGE:n :: MAXimum file AGE - exclude files older than n days/date.

          /MINAGE:n :: MINimum file AGE - exclude files newer than n days/date.

          /MAXLAD:n :: MAXimum Last Access Date - exclude files unused since n.

          /MINLAD:n :: MINimum Last Access Date - exclude files used since n.

                       (If n < 1900 then n = n days, else n = YYYYMMDD date).

 

               /FFT :: assume FAT File Times (2-second granularity).

               /DST :: compensate for one-hour DST time differences.

 

                /XJ :: eXclude symbolic links (for both files and directories) and Junction points.

               /XJD :: eXclude symbolic links for Directories and Junction points.

               /XJF :: eXclude symbolic links for Files.

 

                /IM :: Include Modified files (differing change times).

::

:: Retry Options :

::

               /R:n :: number of Retries on failed copies: default 1 million.

               /W:n :: Wait time between retries: default is 30 seconds.

 

               /REG :: Save /R:n and /W:n in the Registry as default settings.

 

               /TBD :: Wait for sharenames To Be Defined (retry error 67).

 

               /LFSM :: Operate in low free space mode, enabling copy pause and resume (see Remarks).

 

        /LFSM:n[KMG] :: /LFSM, specifying the floor size in n [K:kilo,M:mega,G:giga] bytes.

 

::

:: Logging Options :

::

                 /L :: List only - don't copy, timestamp or delete any files.

                 /X :: report all eXtra files, not just those selected.

                 /V :: produce Verbose output, showing skipped files.

                /TS :: include source file Time Stamps in the output.

                /FP :: include Full Pathname of files in the output.

             /BYTES :: Print sizes as bytes.

 

                /NS :: No Size - don't log file sizes.

                /NC :: No Class - don't log file classes.

               /NFL :: No File List - don't log file names.

               /NDL :: No Directory List - don't log directory names.

 

                /NP :: No Progress - don't display percentage copied.

               /ETA :: show Estimated Time of Arrival of copied files.

 

          /LOG:file :: output status to LOG file (overwrite existing log).

         /LOG+:file :: output status to LOG file (append to existing log).

 

       /UNILOG:file :: output status to LOG file as UNICODE (overwrite existing log).

      /UNILOG+:file :: output status to LOG file as UNICODE (append to existing log).

 

               /TEE :: output to console window, as well as the log file.

 

               /NJH :: No Job Header.

               /NJS :: No Job Summary.

 

           /UNICODE :: output status as UNICODE.

 

::

:: Job Options :

::

       /JOB:jobname :: take parameters from the named JOB file.

      /SAVE:jobname :: SAVE parameters to the named job file

              /QUIT :: QUIT after processing command line (to view parameters).

              /NOSD :: NO Source Directory is specified.

              /NODD :: NO Destination Directory is specified.

                /IF :: Include the following Files.

 

::

:: Remarks :

::

       Using /PURGE or /MIR on the root directory of the volume formerly caused

       robocopy to apply the requested operation on files inside the System

       Volume Information directory as well. This is no longer the case; if

       either is specified, robocopy will skip any files or directories with that

       name in the top-level source and destination directories of the copy session.

 

       The modified files classification applies only when both source

       and destination filesystems support change timestamps (e.g., NTFS)

       and the source and destination files have different change times but are

       otherwise the same. These files are not copied by default; specify /IM

       to include them.

 

       The /DCOPY:E flag requests that extended attribute copying should be

       attempted for directories. Note that currently robocopy will continue

       if a directory's EAs could not be copied. This flag is also not included

       in /COPYALL.

 

       If either /IoMaxSize or /IoRate are specified, robocopy will enable

       copy file throttling (the purpose being to reduce system load).

       Both may be adjusted to allowable or optimal values; i.e., both

       specify desired copy parameters, but the system and robocopy are

       allowed to adjust them to reasonable/allowed values as necessary.

       If /Threshold is also used, it specifies a minimum file size for

       engaging throttling; files below that size will not be throttled.

       Values for all three parameters may be followed by an optional suffix

       character from the set [KMG] (kilo, mega, giga).

 

       Using /LFSM requests robocopy to operate in 'low free space mode'.

       In this mode, robocopy will pause whenever a file copy would cause the

       destination volume's free space to go below a 'floor' value, which

       can be explicitly specified by the LFSM:n[KMG] form of the flag.

       If /LFSM is specified with no explicit floor value, the floor is set to

       ten percent of the destination volume's size.

       Low free space mode is incompatible with /MT and /EFSRAW.

SC

 

 

ERROR:  Unrecognized command

 

DESCRIPTION:

        SC is a command line program used for communicating with the

        Service Control Manager and services.

USAGE:

        sc <server> [command] [service name] <option1> <option2>...

 

 

        The option <server> has the form "\\ServerName"

        Further help on commands can be obtained by typing: "sc [command]"

        Commands:

          query-----------Queries the status for a service, or

                          enumerates the status for types of services.

          queryex---------Queries the extended status for a service, or

                          enumerates the status for types of services.

          start-----------Starts a service.

          pause-----------Sends a PAUSE control request to a service.

          interrogate-----Sends an INTERROGATE control request to a service.

          continue--------Sends a CONTINUE control request to a service.

          stop------------Sends a STOP request to a service.

          config----------Changes the configuration of a service (persistent).

          description-----Changes the description of a service.

          failure---------Changes the actions taken by a service upon failure.

          failureflag-----Changes the failure actions flag of a service.

          sidtype---------Changes the service SID type of a service.

          privs-----------Changes the required privileges of a service.

          managedaccount--Changes the service to mark the service account

                          password as managed by LSA.

          qc--------------Queries the configuration information for a service.

          qdescription----Queries the description for a service.

          qfailure--------Queries the actions taken by a service upon failure.

          qfailureflag----Queries the failure actions flag of a service.

          qsidtype--------Queries the service SID type of a service.

          qprivs----------Queries the required privileges of a service.

          qtriggerinfo----Queries the trigger parameters of a service.

          qpreferrednode--Queries the preferred NUMA node of a service.

          qmanagedaccount-Queries whether a services uses an account with a

                          password managed by LSA.

          qprotection-----Queries the process protection level of a service.

          quserservice----Queries for a local instance of a user service template.

          delete----------Deletes a service (from the registry).

          create----------Creates a service. (adds it to the registry).

          control---------Sends a control to a service.

          sdshow----------Displays a service's security descriptor.

          sdset-----------Sets a service's security descriptor.

          showsid---------Displays the service SID string corresponding to an arbitrary name.

          triggerinfo-----Configures the trigger parameters of a service.

          preferrednode---Sets the preferred NUMA node of a service.

          GetDisplayName--Gets the DisplayName for a service.

          GetKeyName------Gets the ServiceKeyName for a service.

          EnumDepend------Enumerates Service Dependencies.

 

        The following commands don't require a service name:

        sc <server> <command> <option>

          boot------------(ok | bad) Indicates whether the last boot should

                          be saved as the last-known-good boot configuration

          Lock------------Locks the Service Database

          QueryLock-------Queries the LockStatus for the SCManager Database

EXAMPLE:

        sc start MyService

 

 

QUERY and QUERYEX OPTIONS:

        If the query command is followed by a service name, the status

        for that service is returned.  Further options do not apply in

        this case.  If the query command is followed by nothing or one of

        the options listed below, the services are enumerated.

    type=    Type of services to enumerate (driver, service, userservice, all)

             (default = service)

    state=   State of services to enumerate (inactive, all)

             (default = active)

    bufsize= The size (in bytes) of the enumeration buffer

             (default = 4096)

    ri=      The resume index number at which to begin the enumeration

             (default = 0)

    group=   Service group to enumerate

             (default = all groups)

 

SYNTAX EXAMPLES

sc query                - Enumerates status for active services & drivers

sc query eventlog       - Displays status for the eventlog service

sc queryex eventlog     - Displays extended status for the eventlog service

sc query type= driver   - Enumerates only active drivers

sc query type= service  - Enumerates only Win32 services

sc query state= all     - Enumerates all services & drivers

sc query bufsize= 50    - Enumerates with a 50 byte buffer

sc query ri= 14         - Enumerates with resume index = 14

sc queryex group= ""    - Enumerates active services not in a group

sc query type= interact - Enumerates all interactive services

sc query type= driver group= NDIS     - Enumerates all NDIS drivers

 

SCHTASKS

 

 

SCHTASKS /parameter [arguments]

 

Description:

    Enables an administrator to create, delete, query, change, run and

    end scheduled tasks on a local or remote system.

 

Parameter List:

    /Create         Creates a new scheduled task.

 

    /Delete         Deletes the scheduled task(s).

 

    /Query          Displays all scheduled tasks.

 

    /Change         Changes the properties of scheduled task.

 

    /Run            Runs the scheduled task on demand.

 

    /End            Stops the currently running scheduled task.

 

    /ShowSid        Shows the security identifier corresponding to a scheduled task name.

 

    /?              Displays this help message.

 

Examples:

    SCHTASKS

    SCHTASKS /?

    SCHTASKS /Run /?

    SCHTASKS /End /?

    SCHTASKS /Create /?

    SCHTASKS /Delete /?

    SCHTASKS /Query  /?

    SCHTASKS /Change /?

    SCHTASKS /ShowSid /?

SET

 

Displays, sets, or removes cmd.exe environment variables.

 

SET [variable=[string]]

 

  variable  Specifies the environment-variable name.

  string    Specifies a series of characters to assign to the variable.

 

Type SET without parameters to display the current environment variables.

 

If Command Extensions are enabled SET changes as follows:

 

SET command invoked with just a variable name, no equal sign or value

will display the value of all variables whose prefix matches the name

given to the SET command.  For example:

 

    SET P

 

would display all variables that begin with the letter 'P'

 

SET command will set the ERRORLEVEL to 1 if the variable name is not

found in the current environment.

 

SET command will not allow an equal sign to be part of the name of

a variable.

 

Two new switches have been added to the SET command:

 

    SET /A expression

    SET /P variable=[promptString]

 

The /A switch specifies that the string to the right of the equal sign

is a numerical expression that is evaluated.  The expression evaluator

is pretty simple and supports the following operations, in decreasing

order of precedence:

 

    ()                  - grouping

    ! ~ -               - unary operators

    * / %               - arithmetic operators

    + -                 - arithmetic operators

    << >>               - logical shift

    &                   - bitwise and

    ^                   - bitwise exclusive or

    |                   - bitwise or

    = *= /= %= += -=    - assignment

      &= ^= |= <<= >>=

    ,                   - expression separator

 

If you use any of the logical or modulus operators, you will need to

enclose the expression string in quotes.  Any non-numeric strings in the

expression are treated as environment variable names whose values are

converted to numbers before using them.  If an environment variable name

is specified but is not defined in the current environment, then a value

of zero is used.  This allows you to do arithmetic with environment

variable values without having to type all those % signs to get their

values.  If SET /A is executed from the command line outside of a

command script, then it displays the final value of the expression.  The

assignment operator requires an environment variable name to the left of

the assignment operator.  Numeric values are decimal numbers, unless

prefixed by 0x for hexadecimal numbers, and 0 for octal numbers.

So 0x12 is the same as 18 is the same as 022. Please note that the octal

notation can be confusing: 08 and 09 are not valid numbers because 8 and

9 are not valid octal digits.

 

The /P switch allows you to set the value of a variable to a line of input

entered by the user.  Displays the specified promptString before reading

the line of input.  The promptString can be empty.

 

Environment variable substitution has been enhanced as follows:

 

    %PATH:str1=str2%

 

would expand the PATH environment variable, substituting each occurrence

of "str1" in the expanded result with "str2".  "str2" can be the empty

string to effectively delete all occurrences of "str1" from the expanded

output.  "str1" can begin with an asterisk, in which case it will match

everything from the beginning of the expanded output to the first

occurrence of the remaining portion of str1.

 

May also specify substrings for an expansion.

 

    %PATH:~10,5%

 

would expand the PATH environment variable, and then use only the 5

characters that begin at the 11th (offset 10) character of the expanded

result.  If the length is not specified, then it defaults to the

remainder of the variable value.  If either number (offset or length) is

negative, then the number used is the length of the environment variable

value added to the offset or length specified.

 

    %PATH:~-10%

 

would extract the last 10 characters of the PATH variable.

 

    %PATH:~0,-2%

 

would extract all but the last 2 characters of the PATH variable.

 

Finally, support for delayed environment variable expansion has been

added.  This support is always disabled by default, but may be

enabled/disabled via the /V command line switch to CMD.EXE.  See CMD /?

 

Delayed environment variable expansion is useful for getting around

the limitations of the current expansion which happens when a line

of text is read, not when it is executed.  The following example

demonstrates the problem with immediate variable expansion:

 

    set VAR=before

    if "%VAR%" == "before" (

        set VAR=after

        if "%VAR%" == "after" @echo If you see this, it worked

    )

 

would never display the message, since the %VAR% in BOTH IF statements

is substituted when the first IF statement is read, since it logically

includes the body of the IF, which is a compound statement.  So the

IF inside the compound statement is really comparing "before" with

"after" which will never be equal.  Similarly, the following example

will not work as expected:

 

    set LIST=

    for %i in (*) do set LIST=%LIST% %i

    echo %LIST%

 

in that it will NOT build up a list of files in the current directory,

but instead will just set the LIST variable to the last file found.

Again, this is because the %LIST% is expanded just once when the

FOR statement is read, and at that time the LIST variable is empty.

So the actual FOR loop we are executing is:

 

    for %i in (*) do set LIST= %i

 

which just keeps setting LIST to the last file found.

 

Delayed environment variable expansion allows you to use a different

character (the exclamation mark) to expand environment variables at

execution time.  If delayed variable expansion is enabled, the above

examples could be written as follows to work as intended:

 

    set VAR=before

    if "%VAR%" == "before" (

        set VAR=after

        if "!VAR!" == "after" @echo If you see this, it worked

    )

 

    set LIST=

    for %i in (*) do set LIST=!LIST! %i

    echo %LIST%

 

If Command Extensions are enabled, then there are several dynamic

environment variables that can be expanded but which don't show up in

the list of variables displayed by SET.  These variable values are

computed dynamically each time the value of the variable is expanded.

If the user explicitly defines a variable with one of these names, then

that definition will override the dynamic one described below:

 

%CD% - expands to the current directory string.

 

%DATE% - expands to current date using same format as DATE command.

 

%TIME% - expands to current time using same format as TIME command.

 

%RANDOM% - expands to a random decimal number between 0 and 32767.

 

%ERRORLEVEL% - expands to the current ERRORLEVEL value

 

%CMDEXTVERSION% - expands to the current Command Processor Extensions

    version number.

 

%CMDCMDLINE% - expands to the original command line that invoked the

    Command Processor.

 

%HIGHESTNUMANODENUMBER% - expands to the highest NUMA node number

    on this machine.

SETLOCAL

 

Begins localization of environment changes in a batch file.  Environment

changes made after SETLOCAL has been issued are local to the batch file.

ENDLOCAL must be issued to restore the previous settings.  When the end

of a batch script is reached, an implied ENDLOCAL is executed for any

outstanding SETLOCAL commands issued by that batch script.

 

SETLOCAL

 

If Command Extensions are enabled SETLOCAL changes as follows:

 

SETLOCAL batch command now accepts optional arguments:

        ENABLEEXTENSIONS / DISABLEEXTENSIONS

            enable or disable command processor extensions. These

            arguments takes precedence over the CMD /E:ON or /E:OFF

            switches. See CMD /? for details.

        ENABLEDELAYEDEXPANSION / DISABLEDELAYEDEXPANSION

            enable or disable delayed environment variable

            expansion. These arguments takes precedence over the CMD

            /V:ON or /V:OFF switches. See CMD /? for details.

These modifications last until the matching ENDLOCAL command,

regardless of their setting prior to the SETLOCAL command.

 

The SETLOCAL command will set the ERRORLEVEL value if given

an argument.  It will be zero if one of the two valid arguments

is given and one otherwise.  You can use this in batch scripts

to determine if the extensions are available, using the following

technique:

 

    VERIFY OTHER 2>nul

    SETLOCAL ENABLEEXTENSIONS

    IF ERRORLEVEL 1 echo Unable to enable extensions

 

This works because on old versions of CMD.EXE, SETLOCAL does NOT

set the ERRORLEVEL value. The VERIFY command with a bad argument

initializes the ERRORLEVEL value to a non-zero value.

SHIFT

 

Changes the position of replaceable parameters in a batch file.

 

SHIFT [/n]

 

If Command Extensions are enabled the SHIFT command supports

the /n switch which tells the command to start shifting at the

nth argument, where n may be between zero and eight.  For example:

 

    SHIFT /2

 

would shift %3 to %2, %4 to %3, etc. and leave %0 and %1 unaffected.

SHUTDOWN

 

Usage: SHUTDOWN [/i | /l | /s | /sg | /r | /g | /a | /p | /h | /e | /o] [/hybrid] [/soft] [/fw] [/f]

    [/m \\computer][/t xxx][/d [p|u:]xx:yy [/c "comment"]]

 

    No args    Display help. This is the same as typing /?.

    /?         Display help. This is the same as not typing any options.

    /i         Display the graphical user interface (GUI).

               This must be the first option.

    /l         Log off. This cannot be used with /m or /d options.

    /s         Shutdown the computer.

    /sg        Shutdown the computer. On the next boot, if Automatic Restart Sign-On

               is enabled, automatically sign in and lock last interactive user.

               After sign in, restart any registered applications.

    /r         Full shutdown and restart the computer.

    /g         Full shutdown and restart the computer. After the system is rebooted,

               if Automatic Restart Sign-On is enabled, automatically sign in and

               lock last interactive user.

               After sign in, restart any registered applications.

    /a         Abort a system shutdown.

               This can only be used during the time-out period.

               Combine with /fw to clear any pending boots to firmware.

    /p         Turn off the local computer with no time-out or warning.

               Can be used with /d and /f options.

    /h         Hibernate the local computer.

               Can be used with the /f option.

    /hybrid    Performs a shutdown of the computer and prepares it for fast startup.

               Must be used with /s option.

    /fw        Combine with a shutdown option to cause the next boot to go to the

               firmware user interface.

    /e         Document the reason for an unexpected shutdown of a computer.

    /o         Go to the advanced boot options menu and restart the computer.

               Must be used with /r option.

    /m \\computer Specify the target computer.

    /t xxx     Set the time-out period before shutdown to xxx seconds.

               The valid range is 0-315360000 (10 years), with a default of 30.

               If the timeout period is greater than 0, the /f parameter is

               implied.

    /c "comment" Comment on the reason for the restart or shutdown.

               Maximum of 512 characters allowed.

    /f         Force running applications to close without forewarning users.

               The /f parameter is implied when a value greater than 0 is

               specified for the /t parameter.

    /d [p|u:]xx:yy  Provide the reason for the restart or shutdown.

               p indicates that the restart or shutdown is planned.

               u indicates that the reason is user defined.

               If neither p nor u is specified the restart or shutdown is

               unplanned.

               xx is the major reason number (positive integer less than 256).

               yy is the minor reason number (positive integer less than 65536).

 

Reasons on this computer:

(E = Expected U = Unexpected P = planned, C = customer defined)

Type    Major   Minor   Title

 

 U      0       0       Other (Unplanned)

E       0       0       Other (Unplanned)

E P     0       0       Other (Planned)

 U      0       5       Other Failure: System Unresponsive

E       1       1       Hardware: Maintenance (Unplanned)

E P     1       1       Hardware: Maintenance (Planned)

E       1       2       Hardware: Installation (Unplanned)

E P     1       2       Hardware: Installation (Planned)

E       2       2       Operating System: Recovery (Unplanned)

E P     2       2       Operating System: Recovery (Planned)

  P     2       3       Operating System: Upgrade (Planned)

E       2       4       Operating System: Reconfiguration (Unplanned)

E P     2       4       Operating System: Reconfiguration (Planned)

  P     2       16      Operating System: Service pack (Planned)

        2       17      Operating System: Hot fix (Unplanned)

  P     2       17      Operating System: Hot fix (Planned)

        2       18      Operating System: Security fix (Unplanned)

  P     2       18      Operating System: Security fix (Planned)

E       4       1       Application: Maintenance (Unplanned)

E P     4       1       Application: Maintenance (Planned)

E P     4       2       Application: Installation (Planned)

E       4       5       Application: Unresponsive

E       4       6       Application: Unstable

 U      5       15      System Failure: Stop error

 U      5       19      Security issue (Unplanned)

E       5       19      Security issue (Unplanned)

E P     5       19      Security issue (Planned)

E       5       20      Loss of network connectivity (Unplanned)

 U      6       11      Power Failure: Cord Unplugged

 U      6       12      Power Failure: Environment

  P     7       0       Legacy API shutdown

SORT

 

SORT [/R] [/+n] [/M kilobytes] [/L locale] [/REC recordbytes]

 

  [[drive1:][path1]filename1] [/T [drive2:][path2]]

 

  [/O [drive3:][path3]filename3]

 

  /+n                         Specifies the character number, n, to

 

                              begin each comparison.  /+3 indicates that

 

                              each comparison should begin at the 3rd

 

                              character in each line.  Lines with fewer

 

                              than n characters collate before other lines.

 

                              By default comparisons start at the first

 

                              character in each line.

 

  /L[OCALE] locale            Overrides the system default locale with

 

                              the specified one.  The ""C"" locale yields

 

                              the fastest collating sequence and is

 

                              currently the only alternative.  The sort

 

                              is always case insensitive.

 

  /M[EMORY] kilobytes         Specifies amount of main memory to use for

 

                              the sort, in kilobytes.  The memory size is

 

                              always constrained to be a minimum of 160

 

                              kilobytes.  If the memory size is specified

 

                              the exact amount will be used for the sort,

 

                              regardless of how much main memory is

 

                              available.

 

 

 

                              The best performance is usually achieved by

 

                              not specifying a memory size.  By default the

 

                              sort will be done with one pass (no temporary

 

                              file) if it fits in the default maximum

 

                              memory size, otherwise the sort will be done

 

                              in two passes (with the partially sorted data

 

                              being stored in a temporary file) such that

 

                              the amounts of memory used for both the sort

 

                              and merge passes are equal.  The default

 

                              maximum memory size is 90% of available main

 

                              memory if both the input and output are

 

                              files, and 45% of main memory otherwise.

 

  /REC[ORD_MAXIMUM] characters Specifies the maximum number of characters

 

                              in a record (default 4096, maximum 65535).

 

  /R[EVERSE]                  Reverses the sort order; that is,

 

                              sorts Z to A, then 9 to 0.

 

  [drive1:][path1]filename1   Specifies the file to be sorted.  If not

 

                              specified, the standard input is sorted.

 

                              Specifying the input file is faster than

 

                              redirecting the same file as standard input.

 

  /T[EMPORARY]

 

    [drive2:][path2]          Specifies the path of the directory to hold

 

                              the sort's working storage, in case the data

 

                              does not fit in main memory.  The default is

 

                              to use the system temporary directory.

 

  /O[UTPUT]

 

    [drive3:][path3]filename3 Specifies the file where the sorted input is

 

                              to be stored.  If not specified, the data is

 

                              written to the standard output.   Specifying

 

                              the output file is faster than redirecting

 

                              standard output to the same file.

 

 

START

 

Starts a separate window to run a specified program or command.

 

START ["title"] [/D path] [/I] [/MIN] [/MAX] [/SEPARATE | /SHARED]

      [/LOW | /NORMAL | /HIGH | /REALTIME | /ABOVENORMAL | /BELOWNORMAL]

      [/NODE <NUMA node>] [/AFFINITY <hex affinity mask>] [/WAIT] [/B]

      [/MACHINE <x86|amd64|arm|arm64>][command/program] [parameters]

 

    "title"     Title to display in window title bar.

    path        Starting directory.

    B           Start application without creating a new window. The

                application has ^C handling ignored. Unless the application

                enables ^C processing, ^Break is the only way to interrupt

                the application.

    I           The new environment will be the original environment passed

                to the cmd.exe and not the current environment.

    MIN         Start window minimized.

    MAX         Start window maximized.

    SEPARATE    Start 16-bit Windows program in separate memory space.

    SHARED      Start 16-bit Windows program in shared memory space.

    LOW         Start application in the IDLE priority class.

    NORMAL      Start application in the NORMAL priority class.

    HIGH        Start application in the HIGH priority class.

    REALTIME    Start application in the REALTIME priority class.

    ABOVENORMAL Start application in the ABOVENORMAL priority class.

    BELOWNORMAL Start application in the BELOWNORMAL priority class.

    NODE        Specifies the preferred Non-Uniform Memory Architecture (NUMA)

                node as a decimal integer.

    AFFINITY    Specifies the processor affinity mask as a hexadecimal number.

                The process is restricted to running on these processors.

 

                The affinity mask is interpreted differently when /AFFINITY and

                /NODE are combined.  Specify the affinity mask as if the NUMA

                node's processor mask is right shifted to begin at bit zero.

                The process is restricted to running on those processors in

                common between the specified affinity mask and the NUMA node.

                If no processors are in common, the process is restricted to

                running on the specified NUMA node.

    WAIT        Start application and wait for it to terminate.

    MACHINE     Specifies the machine architecture of the application process.

 

    command/program

                If it is an internal cmd command or a batch file then

                the command processor is run with the /K switch to cmd.exe.

                This means that the window will remain after the command

                has been run.

 

                If it is not an internal cmd command or batch file then

                it is a program and will run as either a windowed application

                or a console application.

 

    parameters  These are the parameters passed to the command/program.

 

NOTE: The SEPARATE and SHARED options are not supported on 64-bit platforms.

 

Specifying /NODE allows processes to be created in a way that leverages memory

locality on NUMA systems.  For example, two processes that communicate with

each other heavily through shared memory can be created to share the same

preferred NUMA node in order to minimize memory latencies.  They allocate

memory from the same NUMA node when possible, and they are free to run on

processors outside the specified node.

 

    start /NODE 1 application1.exe

    start /NODE 1 application2.exe

 

These two processes can be further constrained to run on specific processors

within the same NUMA node.  In the following example, application1 runs on the

low-order two processors of the node, while application2 runs on the next two

processors of the node.  This example assumes the specified node has at least

four logical processors.  Note that the node number can be changed to any valid

node number for that computer without having to change the affinity mask.

 

    start /NODE 1 /AFFINITY 0x3 application1.exe

    start /NODE 1 /AFFINITY 0xc application2.exe

 

If Command Extensions are enabled, external command invocation

through the command line or the START command changes as follows:

 

non-executable files may be invoked through their file association just

    by typing the name of the file as a command.  (e.g.  WORD.DOC would

    launch the application associated with the .DOC file extension).

    See the ASSOC and FTYPE commands for how to create these

    associations from within a command script.

 

When executing an application that is a 32-bit GUI application, CMD.EXE

    does not wait for the application to terminate before returning to

    the command prompt.  This new behavior does NOT occur if executing

    within a command script.

 

When executing a command line whose first token is the string "CMD "

    without an extension or path qualifier, then "CMD" is replaced with

    the value of the COMSPEC variable.  This prevents picking up CMD.EXE

    from the current directory.

 

When executing a command line whose first token does NOT contain an

    extension, then CMD.EXE uses the value of the PATHEXT

    environment variable to determine which extensions to look for

    and in what order.  The default value for the PATHEXT variable

    is:

 

        .COM;.EXE;.BAT;.CMD

 

    Notice the syntax is the same as the PATH variable, with

    semicolons separating the different elements.

 

When searching for an executable, if there is no match on any extension,

then looks to see if the name matches a directory name.  If it does, the

START command launches the Explorer on that path.  If done from the

command line, it is the equivalent to doing a CD /D to that path.

SUBST

 

Associates a path with a drive letter.

 

SUBST [drive1: [drive2:]path]

SUBST drive1: /D

 

  drive1:        Specifies a virtual drive to which you want to assign a path.

  [drive2:]path  Specifies a physical drive and path you want to assign to

                 a virtual drive.

  /D             Deletes a substituted (virtual) drive.

 

Type SUBST with no parameters to display a list of current virtual drives.

SYSTEMINFO

 

 

SYSTEMINFO [/S system [/U username [/P [password]]]] [/FO format] [/NH]

 

Description:

    This tool displays operating system configuration information for

    a local or remote machine, including service pack levels.

 

Parameter List:

    /S      system           Specifies the remote system to connect to.

 

    /U      [domain\]user    Specifies the user context under which

                             the command should execute.

 

    /P      [password]       Specifies the password for the given

                             user context. Prompts for input if omitted.

 

    /FO     format           Specifies the format in which the output

                             is to be displayed.

                             Valid values: "TABLE", "LIST", "CSV".

 

    /NH                      Specifies that the "Column Header" should

                             not be displayed in the output.

                             Valid only for "TABLE" and "CSV" formats.

 

    /?                       Displays this help message.

 

Examples:

    SYSTEMINFO

    SYSTEMINFO /?

    SYSTEMINFO /S system

    SYSTEMINFO /S system /U user

    SYSTEMINFO /S system /U domain\user /P password /FO TABLE

    SYSTEMINFO /S system /FO LIST

    SYSTEMINFO /S system /FO CSV /NH

TASKKILL

 

 

TASKKILL [/S system [/U username [/P [password]]]]

         { [/FI filter] [/PID processid | /IM imagename] } [/T] [/F]

 

Description:

    This tool is used to terminate tasks by process id (PID) or image name.

 

Parameter List:

    /S    system           Specifies the remote system to connect to.

 

    /U    [domain\]user    Specifies the user context under which the

                           command should execute.

 

    /P    [password]       Specifies the password for the given user

                           context. Prompts for input if omitted.

 

    /FI   filter           Applies a filter to select a set of tasks.

                           Allows "*" to be used. ex. imagename eq acme*

 

    /PID  processid        Specifies the PID of the process to be terminated.

                           Use TaskList to get the PID.

 

    /IM   imagename        Specifies the image name of the process

                           to be terminated. Wildcard '*' can be used

                           to specify all tasks or image names.

 

    /T                     Terminates the specified process and any

                           child processes which were started by it.

 

    /F                     Specifies to forcefully terminate the process(es).

 

    /?                     Displays this help message.

 

Filters:

    Filter Name   Valid Operators           Valid Value(s)

    -----------   ---------------           -------------------------

    STATUS        eq, ne                    RUNNING |

                                            NOT RESPONDING | UNKNOWN

    IMAGENAME     eq, ne                    Image name

    PID           eq, ne, gt, lt, ge, le    PID value

    SESSION       eq, ne, gt, lt, ge, le    Session number.

    CPUTIME       eq, ne, gt, lt, ge, le    CPU time in the format

                                            of hh:mm:ss.

                                            hh - hours,

                                            mm - minutes, ss - seconds

    MEMUSAGE      eq, ne, gt, lt, ge, le    Memory usage in KB

    USERNAME      eq, ne                    User name in [domain\]user

                                            format

    MODULES       eq, ne                    DLL name

    SERVICES      eq, ne                    Service name

    WINDOWTITLE   eq, ne                    Window title

 

    NOTE

    ----

    1) Wildcard '*' for /IM switch is accepted only when a filter is applied.

    2) Termination of remote processes will always be done forcefully (/F).

    3) "WINDOWTITLE" and "STATUS" filters are not considered when a remote

       machine is specified.

 

Examples:

    TASKKILL /IM notepad.exe

    TASKKILL /PID 1230 /PID 1241 /PID 1253 /T

    TASKKILL /F /IM cmd.exe /T

    TASKKILL /F /FI "PID ge 1000" /FI "WINDOWTITLE ne untitle*"

    TASKKILL /F /FI "USERNAME eq NT AUTHORITY\SYSTEM" /IM notepad.exe

    TASKKILL /S system /U domain\username /FI "USERNAME ne NT*" /IM *

    TASKKILL /S system /U username /P password /FI "IMAGENAME eq note*"

TASKLIST

 

 

TASKLIST [/S system [/U username [/P [password]]]]

         [/M [module] | /SVC | /V] [/FI filter] [/FO format] [/NH]

 

Description:

    This tool displays a list of currently running processes on

    either a local or remote machine.

 

Parameter List:

   /S     system           Specifies the remote system to connect to.

 

   /U     [domain\]user    Specifies the user context under which

                           the command should execute.

 

   /P     [password]       Specifies the password for the given

                           user context. Prompts for input if omitted.

 

   /M     [module]         Lists all tasks currently using the given

                           exe/dll name. If the module name is not

                           specified all loaded modules are displayed.

 

   /SVC                    Displays services hosted in each process.

 

   /APPS                   Displays Store Apps and their associated processes.

 

   /V                      Displays verbose task information.

 

   /FI    filter           Displays a set of tasks that match a

                           given criteria specified by the filter.

 

   /FO    format           Specifies the output format.

                           Valid values: "TABLE", "LIST", "CSV".

 

   /NH                     Specifies that the "Column Header" should

                           not be displayed in the output.

                           Valid only for "TABLE" and "CSV" formats.

 

   /?                      Displays this help message.

 

Filters:

    Filter Name     Valid Operators           Valid Value(s)

    -----------     ---------------           --------------------------

    STATUS          eq, ne                    RUNNING | SUSPENDED

                                              NOT RESPONDING | UNKNOWN

    IMAGENAME       eq, ne                    Image name

    PID             eq, ne, gt, lt, ge, le    PID value

    SESSION         eq, ne, gt, lt, ge, le    Session number

    SESSIONNAME     eq, ne                    Session name

    CPUTIME         eq, ne, gt, lt, ge, le    CPU time in the format

                                              of hh:mm:ss.

                                              hh - hours,

                                              mm - minutes, ss - seconds

    MEMUSAGE        eq, ne, gt, lt, ge, le    Memory usage in KB

    USERNAME        eq, ne                    User name in [domain\]user

                                              format

    SERVICES        eq, ne                    Service name

    WINDOWTITLE     eq, ne                    Window title

    MODULES         eq, ne                    DLL name

 

NOTE: "WINDOWTITLE" and "STATUS" filters are not supported when querying

      a remote machine.

 

Examples:

    TASKLIST

    TASKLIST /M

    TASKLIST /V /FO CSV

    TASKLIST /SVC /FO LIST

    TASKLIST /APPS /FI "STATUS eq RUNNING"

    TASKLIST /M wbem*

    TASKLIST /S system /FO LIST

    TASKLIST /S system /U domain\username /FO CSV /NH

    TASKLIST /S system /U username /P password /FO TABLE /NH

    TASKLIST /FI "USERNAME ne NT AUTHORITY\SYSTEM" /FI "STATUS eq running"

TIME

 

Displays or sets the system time.

 

TIME [/T | time]

 

Type TIME with no parameters to display the current time setting and a prompt

for a new one.  Press ENTER to keep the same time.

 

If Command Extensions are enabled the TIME command supports

the /T switch which tells the command to just output the

current time, without prompting for a new time.

TITLE

 

Sets the window title for the command prompt window.

 

TITLE [string]

 

  string       Specifies the title for the command prompt window.

TREE

 

Graphically displays the folder structure of a drive or path.

 

TREE [drive:][path] [/F] [/A]

 

   /F   Display the names of the files in each folder.

   /A   Use ASCII instead of extended characters.

 

TYPE

 

Displays the contents of a text file or files.

 

TYPE [drive:][path]filename

VER

 

Displays the Windows version.

 

VER

VERIFY

 

Tells cmd.exe whether to verify that your files are written correctly to a

disk.

 

VERIFY [ON | OFF]

 

Type VERIFY without a parameter to display the current VERIFY setting.

VOL

 

Displays the disk volume label and serial number, if they exist.

 

VOL [drive:]

W

 

XCOPY

 

Copies files and directory trees.

 

XCOPY source [destination] [/A | /M] [/D[:date]] [/P] [/S [/E]] [/V] [/W]

                           [/C] [/I] [/-I] [/Q] [/F] [/L] [/G] [/H] [/R] [/T]

                           [/U] [/K] [/N] [/O] [/X] [/Y] [/-Y] [/Z] [/B] [/J]

                           [/EXCLUDE:file1[+file2][+file3]...] [/COMPRESS]

                           [/[-]SPARSE] [/NOCLONE]

 

  source       Specifies the file(s) to copy.

  destination  Specifies the location and/or name of new files.

  /A           Copies only files with the archive attribute set,

               doesn't change the attribute.

  /M           Copies only files with the archive attribute set,

               turns off the archive attribute.

  /D:m-d-y     Copies files changed on or after the specified date.

               If no date is given, copies only those files whose

               source time is newer than the destination time.

  /EXCLUDE:file1[+file2][+file3]...

               Specifies a list of files containing strings.  Each string

               should be in a separate line in the files.  When any of the

               strings match any part of the absolute path of the file to be

               copied, that file will be excluded from being copied.  For

               example, specifying a string like \obj\ or .obj will exclude

               all files underneath the directory obj or all files with the

               .obj extension respectively.

  /P           Prompts you before creating each destination file.

  /S           Copies directories and subdirectories except empty ones.

  /E           Copies directories and subdirectories, including empty ones.

               Same as /S /E. May be used to modify /T.

  /V           Verifies the size of each new file.

  /W           Prompts you to press a key before copying.

  /C           Continues copying even if errors occur.

  /I           If destination does not exist and copying more than one file,

               assumes that destination must be a directory.

  /-I          If destination does not exist and copying a single specified file,

               assumes that destination must be a file.

  /Q           Does not display file names while copying.

  /F           Displays full source and destination file names while copying.

  /L           Displays files that would be copied.

  /G           Allows the copying of encrypted files to destination that does

               not support encryption.

  /H           Copies hidden and system files also.

  /R           Overwrites read-only files.

  /T           Creates directory structure, but does not copy files. Does not

               include empty directories or subdirectories. /T /E includes

               empty directories and subdirectories.

  /U           Copies only files that already exist in destination.

  /K           Copies attributes. Normal Xcopy will reset read-only attributes.

  /N           Copies using the generated short names.

  /O           Copies file ownership and ACL information.

  /X           Copies file audit settings (implies /O).

  /Y           Suppresses prompting to confirm you want to overwrite an

               existing destination file.

  /-Y          Causes prompting to confirm you want to overwrite an

               existing destination file.

  /Z           Copies networked files in restartable mode.

  /B           Copies the Symbolic Link itself versus the target of the link.

  /J           Copies using unbuffered I/O. Recommended for very large files.

  /COMPRESS    Request network compression during file transfer where

               applicable.

  /[-]SPARSE   Enable or disable retaining the sparse state of files during

               copy. /-SPARSE overrides /SPARSE if both are provided.

  /NOCLONE     Do not attempt block cloning as an optimization.

 

The switch /Y may be preset in the COPYCMD environment variable.

This may be overridden with /-Y on the command line.